Largest N gauge range
All products available
Fast shipping
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 12/2025: Woodland, Minitrix
Dear customer,
Just before the weekend, a pallet of Woodland track and ramps arrived at our warehouse. Our stock is now well-stocked for the modeling season!
319.00 EUR
(RRP*)
287.10 EUR*
Art.-no. Minitrix_16826
Minitrix
Prototype: Multi-purpose locomotive 218 117-0 of the NeSA Eisenbahn-Betriebsgesellschaft Neckar-Schwarzwald-Alb mbH (NeSA) as it appeared around 2022.
Model: With built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles driven, traction tires. Headlights and taillights change with the direction of travel, warm white LEDs, cab lighting, digitally switchable. Close coupling mechanism. Directional headlights operate analogously. Separately applied grab irons. Length over buffers 102 mm.
Model: With built-in digital decoder and sound generator for operation with mfx and DCC. Motor with flywheel, 4 axles driven, traction tires. Headlights and taillights change with the direction of travel, warm white LEDs, cab lighting, digitally switchable. Close coupling mechanism. Directional headlights operate analogously. Separately applied grab irons. Length over buffers 102 mm.
2.54 EUR*
Art.-no. Minitrix_14518
Minitrix
R 5 (492.6 mm / 19-3/8) - 15°.Circle = 24 sections of track.
33.99 EUR*
Art.-no. Minitrix_14538
Minitrix
15° Turnout with a Polarized Frog, straight side of the turnout |< 112.6 mm / 4-7/16 >|.Branch radius = R 4 - 15° + 1 x 14503.An electric turnout mechanism can be installed on these turnouts.
The frog for these turnouts is made of metal and is continuously supplied with power by means of a built-in switch, i.e., continuous current supply that is automatically switched over each time the turnout setting is changed.
The frog for these turnouts is made of metal and is continuously supplied with power by means of a built-in switch, i.e., continuous current supply that is automatically switched over each time the turnout setting is changed.
184.90 EUR
(RRP*)
166.41 EUR*
Art.-no. Hobbytrain_H30178
Hobbytrain
To rejuvenate its fleet, SBB Cargo is leasing 35 Class 193 Vectron locomotives from Northrail for domestic Swiss traffic. Unlike the internationally used Vectrons, these locomotives have only two pantographs (AC version) and a classic blue/red livery.
Company number: 193 051
Approval for D, A, CH
Operating status: 2024
Model features:
– Current consumption across all axes
– Interface NEM 662 (Next 18)
– Alternating light white/red, switchable
– Consideration of all design differences in detail
– prepared for sound
– Length over head: 119 mm
– recommended for radius 225 mm
Company number: 193 051
Approval for D, A, CH
Operating status: 2024
Model features:
– Current consumption across all axes
– Interface NEM 662 (Next 18)
– Alternating light white/red, switchable
– Consideration of all design differences in detail
– prepared for sound
– Length over head: 119 mm
– recommended for radius 225 mm
11.79 EUR*
Art.-no. Noch_60158
Noch
Track cleaning has never been easier! The ingenious invention for cleaning model railway tracks are the cleaning gnomes in N gauge (scale 1: 160).
And it's so easy to use:
- The cleaning dwarfs consist of a robust plastic body with a brush-like cleaning surface that effectively removes the dirt on the rails.
- The dwarfs are simply clipped onto the axles of a wagon - and then they clean the rails in normal driving mode in both directions, as it were!
- The cleaning dwarfs in N can be used for two-axle wagons of all brands (axle diameter max. 1.4 mm).
- The cleaning dwarf should only be replaced when the cleaning surface is heavily soiled.
And it's so easy to use:
- The cleaning dwarfs consist of a robust plastic body with a brush-like cleaning surface that effectively removes the dirt on the rails.
- The dwarfs are simply clipped onto the axles of a wagon - and then they clean the rails in normal driving mode in both directions, as it were!
- The cleaning dwarfs in N can be used for two-axle wagons of all brands (axle diameter max. 1.4 mm).
- The cleaning dwarf should only be replaced when the cleaning surface is heavily soiled.
13.95 EUR*
Art.-no. Woodland_WA2140
Woodland Scenics
There are dogs and cats galore in this set - two domestic and one feral cat, and seven dogs, some purebreds and some junkyard mutts. A trash can and fire hydrant complete the scene.
Set contains 12 pieces. Colors may vary from actual product.
Set contains 12 pieces. Colors may vary from actual product.
14.95 EUR*
Art.-no. Woodland_WA2164
Woodland Scenics
Eleven pieces are included in this assortment of square, rounded, cross and obelisk tombstones.
Set contains 11 pieces. Colors may vary from actual product.
Set contains 11 pieces. Colors may vary from actual product.
13.95 EUR*
Art.-no. Woodland_WA2184
Woodland Scenics
A set of skaters. Six are on their feet and one has fallen and can’t get up.
Set contains 7 pieces. Colors may vary from actual product.
Set contains 7 pieces. Colors may vary from actual product.
13.95 EUR*
Art.-no. Woodland_WA2208
Woodland Scenics
You'll find all of this on most loading docks: crates, a scale, forklift and dolly.
Set contains 6 pieces. Colors may vary from actual product.
Set contains 6 pieces. Colors may vary from actual product.
13.95 EUR*
Art.-no. Woodland_WA2209
Woodland Scenics
The neighborhood BBQ attracts some two-legged and four-legged friends.
Set contains 9 pieces. Colors may vary from actual product.
Set contains 9 pieces. Colors may vary from actual product.
13.95 EUR*
Art.-no. Woodland_WA2214
Woodland Scenics
An alfresco dinner and some friendly conversation end the perfect summer day.
Set contains 2 pieces. Colors may vary from actual product.
Set contains 2 pieces. Colors may vary from actual product.
32.95 EUR*
Art.-no. Woodland_WST1410
Woodland Scenics
Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
8 sections rise / fall 10.1 cm in a 4.87 m run
Each section measures 6.35 x 24 inches
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
8 sections rise / fall 10.1 cm in a 4.87 m run
Each section measures 6.35 x 24 inches
24.95 EUR*
Art.-no. Woodland_WST1411
Woodland Scenics
Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
4 sections raise / lower 10.1 cm in a 2.43 m run
Each section measures 6.35 x 24 inches
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
4 sections raise / lower 10.1 cm in a 2.43 m run
Each section measures 6.35 x 24 inches
14.95 EUR*
Art.-no. Woodland_WST1412
Woodland Scenics
Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
8 pieces per pack - each piece rises from 0-1.27 cm) within 60.96 cm and measures 6.35 cm x 60.9 cm.
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
8 pieces per pack - each piece rises from 0-1.27 cm) within 60.96 cm and measures 6.35 cm x 60.9 cm.
14.95 EUR*
Art.-no. Woodland_WST1413
Woodland Scenics
Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
4 pieces per pack - each piece lifts from 0 - 2.54 cm within 60.96 cm and measures 6.35 cm (W) x 60.9 cm (L).
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
4 pieces per pack - each piece lifts from 0 - 2.54 cm within 60.96 cm and measures 6.35 cm (W) x 60.9 cm (L).
16.95 EUR*
Art.-no. Woodland_WST1414
Woodland Scenics
Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.
All risers are a patented product
4 pieces with the dimensions: 1.9 cm x 6.35 cm x 60.9 cm
All risers are a patented product
4 pieces with the dimensions: 1.9 cm x 6.35 cm x 60.9 cm
14.95 EUR*
Art.-no. Woodland_WST1415
Woodland Scenics
Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
6 pieces per pack - each piece rises from 0 - 1.9 cm within 60.96 cm and measures 6.35 cm x 60.9 cm.
To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.
6 pieces per pack - each piece rises from 0 - 1.9 cm within 60.96 cm and measures 6.35 cm x 60.9 cm.
32.95 EUR*
Art.-no. Woodland_WST1416
Woodland Scenics
Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
6 sections raise / lower 11.4 cm in one 3.65 m run
Each section measures 6.35 x 24 inches.
Incline / decline sets are available with either a 2%, 3% or 4% incline.
The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.
NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.
To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.
6 sections raise / lower 11.4 cm in one 3.65 m run
Each section measures 6.35 x 24 inches.
13.95 EUR*
(2996.28cm², base price 46.56 EUR/m²)
Art.-no. Woodland_WST1460
Woodland Scenics
The panels are ideal for track systems and sidings. They can be combined well with cork or Homasote® *. Track-Bed dampens sound, does not have to be soaked like cork, remains flexible and does not dry out or become brittle.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
6 sheets / pack - 3mm x 8.25cm x 60.9cm
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
6 sheets / pack - 3mm x 8.25cm x 60.9cm
28.95 EUR*
Art.-no. Woodland_WST1462
Woodland Scenics
Strips are the perfect underlay for narrow track applications. They can be combined well with cork or Homasote® *. Track-Bed dampens noise, does not need to be pre-watered like cork, remains flexible and does not dry out or become brittle. Also suitable for HOn3 and HOn30 gauges.
Save compared to buying individually.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
36 strips / pack - 3mm x 3.17cm x 60.9cm
* Homasote® is a registered trademark of the Homasote Company.
Save compared to buying individually.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
36 strips / pack - 3mm x 3.17cm x 60.9cm
* Homasote® is a registered trademark of the Homasote Company.
13.95 EUR*
Art.-no. Woodland_WST1472
Woodland Scenics
Strips are the perfect underlay for narrow track applications. They can be combined well with cork or Homasote® *. Track-Bed dampens noise, does not need to be pre-watered like cork, remains flexible and does not dry out or become brittle. Also suitable for HOn3 and HOn30 gauges.
Save compared to buying individually.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fastened with foam nails (ST1432).
12 strips / pack - 3mm x 3.17cm x 60.9cm
* Homasote® is a registered trademark of the Homasote Company.
Save compared to buying individually.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fastened with foam nails (ST1432).
12 strips / pack - 3mm x 3.17cm x 60.9cm
* Homasote® is a registered trademark of the Homasote Company.
13.95 EUR*
Art.-no. Woodland_WST1475
Woodland Scenics
Track-Bed Roll offers a smooth application. It dampens sound, does not have to be pre-watered like cork, remains flexible and does not dry out or become brittle. Combines well with cork or Homasote® * applications. Also ideal for H0n3 and Hon30 gauges.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
1 roll / pack - 3mm x 3.17cm x 7.31m
* Homasote® is a registered trademark of the Homasote Company.
Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).
1 roll / pack - 3mm x 3.17cm x 7.31m
* Homasote® is a registered trademark of the Homasote Company.
39.00 EUR
(RRP*)
10.99 EUR*
(0.18m², base price 61.06 EUR/m²)
Art.-no. Woodland_WST1478
Woodland Scenics
Super Sheets are the perfect base for multi-track stations, switches, loading areas and sidings. They combine well with cork or Homasote. Track-Bed dampens sound, does not need to be soaked like cork, remains flexible and does not dry out or become brittle.
Easy installation with Foam Tack™ Glue (ST1444). Fasten with Foam Nails (ST1432).
3 mm x 30 cm x 60 cm
*Homasote® is a registered trademark of the Homasote Company.
Easy installation with Foam Tack™ Glue (ST1444). Fasten with Foam Nails (ST1432).
3 mm x 30 cm x 60 cm
*Homasote® is a registered trademark of the Homasote Company.
Yours sincerely
Daniel Mrugalski
DM-Toys