N-Scale 11/2025: KaModel

4.20 EUR^*

Art.-no. KaModel_VZ-0

KaModel

Special, fine lubricating grease for gears of model railways and other models. Suitable for lubricating metal and plastic gears. Packaged in a syringe, it allows for convenient lubrication even of hard-to-reach areas, often eliminating the need to disassemble the model.

3ml pack

7.50 EUR^*

Art.-no. KaModel_VZ-1

KaModel

Special, fine lubricating grease for gears of model railways and other models. Suitable for lubricating metal and plastic gears. Packaged in a syringe, it allows for convenient lubrication even of hard-to-reach areas, often eliminating the need to disassemble the model.

10ml pack

4.20 EUR^*

Art.-no. KaModel_VZ-2

KaModel

Special, fine lubricating grease for gears of model railways and other models. Suitable for the lubrication of metal and plastic gears.

5.5ml pack

16.90 EUR^*

Art.-no. KaModel_GP1

KaModel

Practical puller for the safe disassembly of gearboxes, engines, etc.
The set includes pressing rods with diameters of 1.9, 1.8 and 0.9 mm as well as 'half-round' rods with diameters of 2.7 and 1.9 mm.
The rod, with a pressing diameter of 0.9 mm, has a mandrel made of very strong material so that it does not bend during pressing.
Can be used up to a wheel diameter of 11.0 mm.


The mini puller is designed exclusively for precision mechanics. It is primarily used for repairing small locomotive models in HO, TT, and N scales. Typical applications include removing pinions and wheels from wheelsets, motor gears, miniature bearings, and more. It can also be used for other similar applications.
Cannot be used for removing power-driven parts for demanding applications, such as typically pinions or bearings for motors and tools, etc.

20.80 EUR^*

Art.-no. KaModel_GP1-A

KaModel

Practical GP1 puller for safe disassembly of gearboxes, engines, etc.
The set includes pressing rods with diameters of 1.9, 1.8 and 0.9 mm as well as 'half-round' rods with diameters of 2.7 and 1.9 mm.
The rod, with a pressing diameter of 0.9 mm, has a mandrel made of very strong material so that it does not bend during pressing.
Can be used up to a wheel diameter of 11.0 mm.
Also includes a practical stand for the puller


The mini puller is designed exclusively for precision mechanics. It is primarily used for repairing small locomotive models in HO, TT, and N scales. Typical applications include removing pinions and wheels from wheelsets, motor gears, miniature bearings, and more. It can also be used for other similar applications.
Cannot be used for removing power-driven parts for demanding applications, such as typically pinions or bearings for motors and tools, etc.

20.80 EUR^*

Art.-no. KaModel_GP2

KaModel

Practical GP2 puller for safe disassembly of gearboxes, engines, etc.
The set includes press rods with diameters of 0.9; 1.6; 1.9; 2.9 and 3.9mm as well as 'conical' rods with diameters of 2.0mm
The rod, with a pressing diameter of 0.9 mm, has a mandrel made of very strong material so that it does not bend during pressing.
Can be used up to a wheel diameter of 20.0 mm.

The mini puller is designed exclusively for precision mechanics. It is primarily used for repairing small locomotive models in HO, TT, and N scales. Typical applications include removing pinions and wheels from wheelsets, motor gears, miniature bearings, and more. It can also be used for other similar applications.
Cannot be used for removing power-driven parts for demanding applications, such as typically pinions or bearings for motors and tools, etc.

24.60 EUR^*

Art.-no. KaModel_GP2-A

KaModel

Practical GP2 puller for safe disassembly of gearboxes, engines, etc.
The set includes press rods with diameters of 0.9; 1.6; 1.9; 2.9 and 3.9mm as well as 'conical' rods with diameters of 2.0mm
The rod, with a pressing diameter of 0.9 mm, has a mandrel made of very strong material so that it does not bend during pressing.
Can be used up to a wheel diameter of 20.0 mm.

Practical stand included

The mini puller is designed exclusively for precision mechanics. It is primarily used for repairing small locomotive models in HO, TT, and N scales. Typical applications include removing pinions and wheels from wheelsets, motor gears, miniature bearings, and more. It can also be used for other similar applications.
Cannot be used for removing power-driven parts for demanding applications, such as typically pinions or bearings for motors and tools, etc.

7.50 EUR^*

Art.-no. KaModel_K100

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Fleischmann BR 212 (7230 etc.)


The set contains:
- 4 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

6.70 EUR^*

Art.-no. KaModel_K101

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 89

The set contains:
- 3 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

3.10 EUR^*

Art.-no. KaModel_K102

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 89 (T3)

The set contains:
- 1 pc. contact

5.00 EUR^*

Art.-no. KaModel_K103

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Minitrix BR 221 / V 200, E10, E40 (1st series)

The set contains:
- 2 pcs. contacts

6.90 EUR^*

Art.-no. KaModel_K104

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 38

The set contains:
- 2 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)
- 1 x plastic rod for fastening 1.5 x 50 mm (pre-drill with 1.6 mm drill bit)

9.40 EUR^*

Art.-no. KaModel_K105

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 39

Set K105 for locomotive contains:
- 2 pcs. contacts K105
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

If the plastic rod breaks when removing the old contact, we replace it with the supplied plastic rod according to the instructions

6.50 EUR^*

Art.-no. KaModel_K106

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 39

Set K106 for tender contains:
- 2 pcs. contacts K106
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

If the plastic rod breaks when removing the old contact, we replace it with the supplied plastic rod according to the instructions

7.50 EUR^*

Art.-no. KaModel_K107

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 50

The set contains:
- 2 pcs. contacts
- 1 x 50mm plastic rod for fastening (pre-drill with a 1.2mm drill bit)
- 1 x screw 1.4x3mm (pre-drill with 1.3mm drill bit)

Use the included M1.4x3mm screw to secure one contact. Drill out the original rivet approximately 3 mm deep using a 1.3 mm drill bit.

10.80 EUR^*

Art.-no. KaModel_K108

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 94

The set contains:
- 8 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)
- 4 pcs. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)

Watch a video here that shows how to replace contacts and how to fix them using plastic pins:

4.20 EUR^*

Art.-no. KaModel_K109

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann locomotive 7

The set contains:
- 2 pcs. contacts
- 2 pcs. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)

For fastening, use the rivets as shown in the photos

5.40 EUR^*

Art.-no. KaModel_K110

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann ´factory locomotive´

The set contains:
- 2 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

7.50 EUR^*

Art.-no. KaModel_K111

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 050

The set contains:
- 2 pcs. contacts
- 1 x 50mm plastic rod for fastening (pre-drill with a 1.2mm drill bit)
- 4 pcs. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)
- 1 x screw 1.4x3mm (pre-drill with 1.3mm drill bit)

Use the included M1.4x3mm screw to secure one contact. Drill out the original rivet approximately 3 mm deep using a 1.3 mm drill bit.

The kit includes both rivets and a plastic rod. However, we recommend using the plastic rod as a replacement for the metal rivets.

9.00 EUR^*

Art.-no. KaModel_K112

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold “Krokodýl” E 94 / BR 194 / 1020 ÖBB

The set contains:
- 4 pcs. contacts

9.20 EUR^*

Art.-no. KaModel_K113

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold BR 96 ´Mallet´

The set contains:
- 4 pcs. contacts (non-bent)

It is also possible to purchase a set of pre-bent contacts.

12.70 EUR^*

Art.-no. KaModel_K113-O

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold BR 96 ´Mallet´

The set contains:
- 4 pcs. contacts (bent)

It is also possible to purchase a set of unbent contacts at a lower price.

8.50 EUR^*

Art.-no. KaModel_K114

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold BR 41

The set contains:
- 2 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)
- 1 piece insulation plate

If the plastic rod breaks when removing the old contact, we replace it with the supplied plastic rod according to the instructions

6.20 EUR^*

Art.-no. KaModel_K132

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 89.7 (T3)

The set contains:
- 2 pcs. contacts
- 1 x plastic mounting rod 0.5 x 50 mm (pre-drill with a 0.7 mm drill bit)

5.80 EUR^*

Art.-no. KaModel_K133

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Minitrix N Minitrix BR 261/360/364, V60

The set contains:
- 2 pcs. contacts
- 1 x plastic mounting rod 0.8 x 50 mm (pre-drill with a 1.0 mm drill bit)

2.70 EUR^*

Art.-no. KaModel_K135A

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 01 (1st series)

The set contains:
- 1 pc. contacts

3.10 EUR^*

Art.-no. KaModel_K135B

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 01 (1st series)

The set contains:
- 2 pcs. contacts

5.60 EUR^*

Art.-no. KaModel_K137

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix V 160 / BR 216
The set contains:
- 2 pcs. contacts
- 1 x 50mm plastic mounting rod (pre-drill with a 1.2mm drill bit)

4.60 EUR^*

Art.-no. KaModel_K138

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix E 03 / BR 103, BR 151

The set contains:
- 2 pcs. contacts
- 1 x plastic mounting rod 0.8 x 50 mm (pre-drill with a 1.0 mm drill bit)

6.30 EUR^*

Art.-no. KaModel_K142

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 81

The set contains:
- 2 pcs. contacts
- 1 x plastic rod for fastening 1.0x50mm (pre-drill with 1.2mm drill bit)
- 2 pcs. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)

7.50 EUR^*

Art.-no. KaModel_K143

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 65

The set contains:
- 4 pcs. contacts
- 1 x plastic rod for fastening 1.0x50mm (pre-drill with 1.2mm drill bit)
- 2 pcs. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)

6.20 EUR^*

Art.-no. KaModel_K144

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix BR 64

The set contains:
- 2 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

6.50 EUR^*

Art.-no. KaModel_K145

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Roco BB 63000 SNCF

The set contains:
- 4 pcs. contacts
- 1 x plastic rod for fastening 0.8x50mm (pre-drill with 1.0mm drill bit)

6.30 EUR^*

Art.-no. KaModel_K146

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Roco BR 215

The set contains:
- 4 pcs. contacts
- 1 x plastic rod for fastening 0.5x50mm (pre-drill with 0.7mm drill bit)

5.40 EUR^*

Art.-no. KaModel_K147

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Minitrix VT/VS 98

The set contains:
- 4 pcs. contacts

8.10 EUR^*

Art.-no. KaModel_K148

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Arnold E17 / BR117, E18 / BR118

The set contains:
- 4 pcs. contacts

6.30 EUR^*

Art.-no. KaModel_K149

KaModel

KaModel replacement contacts in high quality, precisely processed, for N Roco ET 85, ET 90, BR 485
The set contains:
- 2 pcs. contacts
- 1 x plastic mounting rod 1.5 x 50 mm (pre-drill with a 1.6 mm drill bit)

7.10 EUR^*

Art.-no. KaModel_K151

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Arnold E 03 / BR 103

The set contains:
- 2 pcs. contacts

6.90 EUR^*

Art.-no. KaModel_K154

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Arnold (Hornby) BR 250

The set contains:
- 4 contacts - 1 plastic mounting rod 0.5x50mm (pre-drill with a 0.7mm drill bit)

5.40 EUR^*

Art.-no. KaModel_K156

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Minitrix BR 98.3 “Glaskasten”

The set contains:
- 2 pcs. contacts - 1 pc. plastic rod for fastening 0.5x50mm (pre-drill with 0.7mm drill)

10.00 EUR^*

Art.-no. KaModel_K179

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold car lighting

The contacts K179/K are replacements for Arnold part 7365-52 and similar.
The springs K179/R are replacements for the Arnold part 0736-75.

Before installing the lighting, the vehicle must be equipped with wheel sets that have a plastic wheel on one side. You can create this wheel set from a metal and a plastic wheel set by swapping the wheels (shown in the video).
Without this change, the chassis will be short-circuited and the springs will be destroyed

The set K179 contains:
- 2 pieces of contacts
- 4 springs

5.80 EUR^*

Art.-no. KaModel_K179-K

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold car lighting

The contacts K179/K are replacements for Arnold part 7365-52 and similar.

Before installing the lighting, the vehicle must be equipped with wheel sets that have a plastic wheel on one side. You can create this wheel set from a metal and a plastic wheel set by swapping the wheels (shown in the video).
Without this change, the chassis will be short-circuited and the springs will be destroyed

The set K179/K contains:
- 2 pieces of contacts

5.00 EUR^*

Art.-no. KaModel_K179-R

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Arnold car lighting

The springs K179/R are replacements for the Arnold part 0736-75.

Before installing the lighting, the vehicle must be equipped with wheel sets that have a plastic wheel on one side. You can create this wheel set from a metal and a plastic wheel set by swapping the wheels (shown in the video).
Without this change, the chassis will be short-circuited and the springs will be destroyed

The set K179/R contains:
- 4 springs

7.70 EUR^*

Art.-no. KaModel_K300

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann ELB 215 “Privatbahn” “Edelweiss”

The set contains:
- 2 pcs. contacts
- 1 x plastic rod for fastening 1.0x50mm (pre-drill with 1.2mm drill bit)
- 1 pc. Niten 1.3x2.5mm (pre-drill with 1.3mm drill bit)

6.20 EUR^*

Art.-no. KaModel_K320-A

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Arnold E 63 / BR 163

The K320/A set contains:
- 2 pcs. contacts for rear and middle wheels
Newly developed replacement for the original contacts (K320/A), which can be unreliable in operation.
Replacing the contacts is very easy (see video). When replacing the contacts for the front wheel set, the plastic rod to which the contact is attached may be damaged or broken. In this case, a plastic rod is included that can be used to create a new pin (see video).
The contact must not bend and touch the metal frame - check.

6.20 EUR^*

Art.-no. KaModel_K320-B.C

KaModel

KaModel replacement contacts in high quality, precisely processed,
for N Arnold E 63 / BR 163

The set K320/B,C contains:
- 2 pcs. contacts for front wheels - 1 pc. plastic rod for fastening 1.0x50mm (pre-drill with 1.0mm drill)

6.50 EUR^*

Art.-no. KaModel_K79

KaModel

KaModel spare parts for locomotive models N/Arnold

V200

4 pieces

18.80 EUR^*

Art.-no. KaModel_K93B-10x

KaModel

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 10 switching contacts N
- 10 screws
- 10 washers


Product developed for model builders aged 15 and over

4.60 EUR^*

Art.-no. KaModel_K93B-2x

KaModel

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 2 switching contacts N
- 2 screws
- 2 washers


Product developed for model builders aged 15 and over

8.50 EUR^*

Art.-no. KaModel_K93B-4x

KaModel

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 4 switching contacts N
- 4 screws
- 4 washers


Product developed for model builders aged 15 and over

22.70 EUR^*

Art.-no. KaModel_K93B.1-10x

KaModel

Black switching contacts for tracks with wooden sleepers.
Thanks to the new black paint finish, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 10x switching contacts
- 10x screws
- 10x washers

5.40 EUR^*

Art.-no. KaModel_K93B.1-2x

KaModel

Black switching contacts for tracks with wooden sleepers.
Thanks to the new black paint finish, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 2x switching contacts
- 2x screws
- 2x washers

10.00 EUR^*

Art.-no. KaModel_K93B.1-4x

KaModel

Black switching contacts for tracks with wooden sleepers.
Thanks to the new black paint finish, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 4x switching contacts
- 4x screws
- 4x washers

22.70 EUR^*

Art.-no. KaModel_K93B.2-10x

KaModel

Nickel-plated switching contacts for tracks with concrete sleepers
Thanks to the nickel plating, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 10x switching contacts
- 10x screws
- 10x washers

5.40 EUR^*

Art.-no. KaModel_K93B.2-2x

KaModel

Nickel-plated switching contacts for tracks with concrete sleepers
Thanks to the nickel plating, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 2x switching contacts
- 2x screws
- 2x washers

10.00 EUR^*

Art.-no. KaModel_K93B.2-4x

KaModel

Nickel-plated switching contacts for tracks with concrete sleepers
Thanks to the nickel plating, the contacts on the tracks are completely inconspicuous.

KaModel switch contacts. An inexpensive and simple solution for setting up a switch track on your route.
Stand on the tracks and control the lowering of level crossings, signals, drawbridges, and anything else you can think of.
The advantage is the easy installation
The major advantage over magnetic switching contacts is its simplicity. No magnets need to be attached to the locomotives; the locomotive switches the contact with its wheel.
Suitable for both analog and digital control

The contacts are designed for both fixed and flexible tracks in N gauge (Fleischmann, Minitrix, Peco, Kato...)

The kit contains:
- 4x switching contacts
- 4x screws
- 4x washers

6.90 EUR^*

Art.-no. KaModel_K98

KaModel

KaModel replacement contacts in high quality, precisely processed
for N Fleischmann BR 103 (7375 etc.)

The set contains:
- 4 pcs. contacts
- 1 pc. plastic rod for fastening 0.8x50mm (pre-drill with 1mm drill)

3.80 EUR^*

Art.-no. KaModel_KAT-B-DE

KaModel

Two years after the first publication of the traction tire catalog, it's time for an update. The catalog and the website have been expanded to include new products in the locomotive manufacturers' product ranges starting in 2023 and, in some cases, 2024.

In addition to regular updates, we have also created lists for other manufacturers. Specifically: - the original Italian production from Lima in H0 and N gauges; - the original Italian production from Rivarossi in H0 and N scales; - the sought-after traction tires for Brawa models in N gauge
- In addition, there are also some changes to the replacement and supplementary lists for Fleischmann models in H0 gauge. After a long time, we have also added new traction tire sizes to our range. These include, in particular, very narrow traction tires for the N Brawa and N Arnold locomotive models. In total, the traction tires are now available in 50 new sizes, bringing the complete range to 235 sizes.

Judging by the feedback we've received from you, the catalog is a highly valued resource, and I'm therefore delighted that this new version with the aforementioned updates is now available. After all, I use it myself almost every day.

Catalog available as PDF

3.10 EUR^*

Art.-no. KaModel_MGT-1

KaModel

Magnetizers and demagnetizers.
Very useful for screwing tracks and much more
1 piece

1.90 EUR^*

Art.-no. KaModel_MS-OBL-1

KaModel

Hand-operated locking screws for curved track template couplings

These hand-operated locking screws can be used instead of the Allen screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

Pack of 4 pieces

9.60 EUR^*

Art.-no. KaModel_MT-MIX-90x

KaModel

MT/MIX, Nuts Mix, M1.0 - M2.5, Steel, Stainless Steel, Brass, 90pcs

The package contains:
Stainless steel nuts:
- M1.0 - 5 pieces
- M1.2 - 5 pieces
- M1.4 - 5 pieces
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces
Black steel nuts:
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces
Nuts made of zinc white steel:
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces
Brass nuts:
- M1.0 - 5 pieces
- M1.2 - 5 pieces
- M1.4 - 5 pieces
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces

A total of 90 pieces

3.80 EUR^*

Art.-no. KaModel_MT1-MIX-30x

KaModel

The package contains:
Stainless steel nuts:
- M1.0 - 5 pieces
- M1.2 - 5 pieces
- M1.4 - 5 pieces
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces

2.70 EUR^*

Art.-no. KaModel_MT2-MIX-15x

KaModel

Black steel nuts:
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces

2.70 EUR^*

Art.-no. KaModel_MT3-MIX-15x

KaModel

Nuts made of zinc white steel:
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces

3.80 EUR^*

Art.-no. KaModel_MT4-MIX-30x

KaModel

Brass nuts:
- M1.0 - 5 pieces
- M1.2 - 5 pieces
- M1.4 - 5 pieces
- M1.6 - 5 pieces
- M2.0 - 5 pieces
- M2.5 - 5 pieces

13.50 EUR^*

Art.-no. KaModel_N-C2

KaModel

Adjustable couplings for easy laying of flex tracks N Fleischmann, N Peco
They allow you to create your own precise arc radii.
At the couplings you set the axial distance between the tracks.
By sliding on the tracks you keep the correct distance and fix the tracks
They will help you considerably in your work also our track mounting clips
You adjust the track to the desired radius.
You only check the axial distance with the couplings.
These adjustable couplings are suitable where you choose your own radii
(outside the normalized and recommended radii)
For standardized radii, which most manufacturers specify in their catalog,
we recommend using our product,
namely curved and straight templates for laying flex tracks.
This is a very precise and at the same time convenient way to lay the tracks.

21.20 EUR^*

Art.-no. KaModel_N-F-L150-C1

KaModel

Straight template for laying straight sections of Flexi-tracks FLEISCHMANN - N.
Thanks to the adjustable couplings, you can lay the tracks
at any distance with high accuracy

The set contains:
1 straight template, length 150 mm (N/F/L150/C1)
2 adjustable couplings N/C1
2 snap couplings with single track center distance
1 Allen key
Instructions

Adjustable couplings are fixed with screws in the template

23.50 EUR^*

Art.-no. KaModel_N-F-L300-C1

KaModel

Straight template for laying straight sections of FLEISCHMANN-N flexi-tracks.
Thanks to the adjustable couplings, you can lay the tracks
at any distance with high accuracy

The set contains:
1 straight template, length 300 mm (N/F/L300/C1)
2 adjustable couplings N/C1
2 snap couplings with single track center distance
1 Allen key
Instructions


Adjustable couplings are fixed with screws in the template

13.50 EUR^*

Art.-no. KaModel_N-F-R194.6

KaModel

The package contains:
- Curved track template R194.6
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

14.20 EUR^*

Art.-no. KaModel_N-F-R228.2

KaModel

The package contains:
- Curved track template R228.2
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

15.00 EUR^*

Art.-no. KaModel_N-F-R261.8

KaModel

The package contains:
- Curved track template R261.8
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

15.80 EUR^*

Art.-no. KaModel_N-F-R295.4

KaModel

The package contains:
- Curved track template R295.4
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

16.50 EUR^*

Art.-no. KaModel_N-F-R329

KaModel

The package contains:
- Curved track template R329
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

18.80 EUR^*

Art.-no. KaModel_N-F-R429.8

KaModel

The package contains:
- Curved track template R429.8
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

19.60 EUR^*

Art.-no. KaModel_N-F-R463.4

KaModel

The package contains:
- Curved track template R463.4
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

20.40 EUR^*

Art.-no. KaModel_N-F-R497

KaModel

The package contains:
- Curved track template R497
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

88.10 EUR^*

Art.-no. KaModel_N-F-SET

KaModel

The package contains:
- 6pcs Curved track templates SET: R194,6 R228,2 R261,8 R295,4 R329 R362,6
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

157.30 EUR^*

Art.-no. KaModel_N-F-SET-E

KaModel

The package contains:
- 10pcs Curved track templates SET: R194,6 R228,2 R261,8 R295,4 R329 R362,6 R396,2 R429,8 R463,4 R497
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

72.70 EUR^*

Art.-no. KaModel_N-F-SET-S

KaModel

The package contains:
- 4pcs Curved Track Templates SET: R396.2 R429.8 R463.4 R497
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy installation of flexible track.
Does laying tracks also enable model railroaders who previously avoided using flexible tracks precisely because of the difficult laying process?

The templates make installation easier, just like working with fixed tracks.
The templates are manufactured in all normalized radii of a specific manufacturer.

The stencils are supplied in the manufacturer's standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

17.30 EUR^*

Art.-no. KaModel_N-H1

KaModel

These clips prevent unwanted sliding out of the sleepers of flexible tracks
They fix the tracks firmly and it is possible to shape them into the desired curve
We recommend using it together with stencils from our production
Suitable for:
Fleischmann flex tracks with and without bedding,
Peco Code 80 and Code 55

We do not recommend for Kato flex tracks!

2 pieces/1 set N gauge

15.00 EUR^*

Art.-no. KaModel_N-K1

KaModel

With this special compass, you can accurately draw the large radii required when laying track. Specifically, the compass can draw a radius of up to 1000 mm (2000 mm diameter).

The compass can also be used together with the curved track template so that the template always has the correct distance from the center of the curve.

But the compass can also be used for other purposes. For example, to draw a rounded corner of the track, to create cork trackbeds of any radius, or to create plates for curved inclines.

The set includes a compass and a pencil

21.20 EUR^*

Art.-no. KaModel_N-PE-L150-C1

KaModel

Straight template for laying straight sections of Flexi-Track PECO
Thanks to the adjustable couplings, you can lay the tracks
at any distance with high accuracy

The set contains:
1 straight template, length 150 mm (N/PE/L150/C1)
2 adjustable couplings N/C1
2 snap couplings with single track center distance
1 Allen key
Instructions

Adjustable couplings are fixed with screws in the template

23.50 EUR^*

Art.-no. KaModel_N-PE-L300-C1

KaModel

Straight template for laying straight sections of PECO-N flexi-track.
Thanks to the adjustable couplings, you can lay the tracks
at any distance with high accuracy

The set contains:
1 straight template, length 300 mm (N/PE/L300/C1)
2 adjustable couplings N/C1
2 snap couplings with single track center distance
1 Allen key
Instructions

Adjustable couplings are fixed with screws in the template

14.20 EUR^*

Art.-no. KaModel_N-PE-R228

KaModel

The package contains:
- Curved track template R228
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

15.00 EUR^*

Art.-no. KaModel_N-PE-R263.5

KaModel

The package contains:
- Curved track template R263.5
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

15.80 EUR^*

Art.-no. KaModel_N-PE-R298.5

KaModel

The package contains:
- Curved track template R298.5
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

16.50 EUR^*

Art.-no. KaModel_N-PE-R333.4

KaModel

The package contains:
- Curved track template R333.4
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

17.30 EUR^*

Art.-no. KaModel_N-PE-R370

KaModel

The package contains:
- Curved track template R370
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

18.10 EUR^*

Art.-no. KaModel_N-PE-R405.5

KaModel

The package contains:
- Curved track template R405.5
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

18.80 EUR^*

Art.-no. KaModel_N-PE-R441

KaModel

The package contains:
- Curved track template R441
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

19.60 EUR^*

Art.-no. KaModel_N-PE-R476.5

KaModel

The package contains:
- Curved track template R476.5
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

20.40 EUR^*

Art.-no. KaModel_N-PE-R512

KaModel

The package contains:
- Curved track template R512
- 2x clutch
- 2x hexagon locking screws
- Allen key 2.0
- Allen key 2.5

For easy handling without an Allen key, we recommend MS/OBL/1 pack of 4 hand screws.

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

57.30 EUR^*

Art.-no. KaModel_N-PE-SET

KaModel

The package contains:
- 4pcs curved track templates SET: R228 R263,5 R298,5 R333,4
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

141.90 EUR^*

Art.-no. KaModel_N-PE-SET-E

KaModel

The package contains:
- 9pcs curved track templates SET: R228 R263,5 R298,5 R333,4 R370 R405,5 R441 R476,5 R512
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

90.40 EUR^*

Art.-no. KaModel_N-PE-SET-S

KaModel

The package contains:
- 5pcs curved track templates SET: R370 R405,5 R441 R476,5 R512
- Couplings
- Hexagon locking screws
- Allen key 2.0
- Allen key 2.5

* Pack of 4 hand screws (only one pack per order, regardless of the number of templates ordered)

Professionally manufactured templates made of solid duralumin alloy for easy laying of flex tracks
Allows the laying of tracks even for model builders who previously avoided the use of flex tracks because of the difficulty of laying them.

The templates make installation easier as if you were working with fixed tracks
The templates are produced in all standardized radii of a specific manufacturer

The templates are supplied in the manufacturer’s standard radii.

The different radii can be connected with snap couplings.
Snap couplings ensure the exact distance between the tracks and the correct passage profile
This ensures a perfect parallel track spacing.

Hand-operated locking screws
These hand screws can be used instead of the hex screws included with the templates. Therefore, there is no need to use an Allen key or screwdriver to connect/disconnect the templates.

When you order curved track templates from us, you'll always receive a pack of 4 free. If you need more of these screws, you can purchase additional packs of screws here.

28.80 EUR^*

Art.-no. KaModel_n.DT1-N

KaModel

n.DT1/N, KaModel drilling device for laying flex tracks N Fleischmann, Minitrix, Kato

With this special device, every model builder can accurately and precisely pre-drill the sleepers and the substructure for later screwing the tracks together.
It is also suitable for pre-drilled sleepers; simply fit and drill down to the floor.
No more dealing with holes, etc., which many model makers are familiar with. The device is addictive and makes your work much easier.
The quality and accuracy of the fittings will also be high with this device.
It can also be used in combination with track templates.
The product is made of high-quality steel and hardened to high hardness, so that repeated drilling does not wear out the guide hole.

When using countersunk screws, the screws can be completely countersunk into the threshold, leaving no protrusion at all. Please refer to the instructions for the exact procedure.

drilling device
For drills with a diameter of 0.9 mm and 1.8 mm
Screws with a diameter of 1mm from our range are suitable for the device

The package contains:
- Drilling device
- Small drill
- Large drill with stop
- Allen key for stop
- Directions

28.80 EUR^*

Art.-no. KaModel_n.DT2-N

KaModel

n.DT2/N, drilling device KaModel for laying flex tracks N Peco SL-300

With this special device, every model builder can accurately and precisely pre-drill the sleepers and the substructure for later screwing the tracks together.
It is also suitable for pre-drilled sleepers; simply fit and drill down to the floor.
No more dealing with holes, etc., which many model makers are familiar with. The device is addictive and makes your work much easier.
The quality and accuracy of the fittings will also be high with this device.
It can also be used in combination with track templates.
The product is made of high-quality steel and hardened to high hardness, so that repeated drilling does not wear out the guide hole.

When using countersunk screws, the screws can be completely countersunk into the threshold, leaving no protrusion at all. Please refer to the instructions for the exact procedure.

drilling device
For drills with a diameter of 0.9 mm and 1.8 mm
Screws with a diameter of 1mm from our range are suitable for the device

The package contains:
- Drilling device
- Small drill
- Large drill with stop
- Allen key for stop
- Directions

3.30 EUR^*

Art.-no. KaModel_PP0

KaModel

Size: 80 x 100 mm
Thickness: 0.05mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact:
0.05 mm - Very fine coating; the sheet metal offers minimal resistance to the wheel during clamping. (HO, TT, N)
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger
0.20 mm longer and stronger

5.80 EUR^*

Art.-no. KaModel_PP0A

KaModel

Size: 80 x 200 mm
Thickness: 0.05mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Select the material thickness according to the length and shape of the contacts
0.05 mm - Very fine coating; the sheet metal offers minimal resistance to the wheel during clamping. (HO, TT, N)
0.10 mm is suitable for smaller and finer applications (HO,TT,N)
0.15 mm longer and stronger (HO,TT)
0.20 mm longer and stronger (HO)

2.70 EUR^*

Art.-no. KaModel_PP1

KaModel

Special sheet metal alloy for the production of contacts G,O,HO,TT,N
Size: 75 x 90 mm
Thickness: 0.10mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger

5.00 EUR^*

Art.-no. KaModel_PP1A

KaModel

Special sheet metal alloy for the production of contacts G,O,HO,TT,N
Size: 75 x 180 mm
Thickness: 0.10mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger

3.30 EUR^*

Art.-no. KaModel_PP2

KaModel

Size: 83 x 90 mm
Thickness: 0.15mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger

2.70 EUR^*

Art.-no. KaModel_PP3

KaModel

Special spring steel for the production of contacts
Spring-hardened steel suitable for locomotive contacts and other applications....
Sheet thickness 0.15mm
hardened
can be soldered
1 pc/70x70mm

3.30 EUR^*

Art.-no. KaModel_PP4

KaModel

Size: 75 x 180 mm
Thickness: 0.20mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger
0.20 mm longer and stronger

4.20 EUR^*

Art.-no. KaModel_PP5

KaModel

Size: 83 x 90 mm
Thickness: 0.25mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15+ mm longer and stronger

4.80 EUR^*

Art.-no. KaModel_PP6

KaModel

Size: 83 x 90 mm
Thickness: 0.30mm

Spring-loaded, easy to work with, can be cut with normal scissors
Perfectly malleable material that also retains great flexibility

Suitable for the production of very fine locomotive contacts, electromechanical components, etc.
Can be soldered perfectly

Choose the material thickness according to the length and shape of the contact.
0.10 mm is suitable for smaller and finer applications,
0.15 mm longer and stronger

3.80 EUR^*

Art.-no. KaModel_PR4

KaModel

KaModel spare parts in high quality, precisely processed,
for N Lima BR 66

The set contains:
- 3 springs

7.50 EUR^*

Art.-no. KaModel_RP-1

KaModel

Hand drill (for drill bits 0.3-3.4mm)

Tool for fine drilling of holes by hand.

1pc

13.50 EUR^*

Art.-no. KaModel_RP-1A

KaModel

Hand drill (for drill bits 0.3-3.4mm)

with 10-piece set of drill bits 0.8/1.0/1.2/1.5/1.8/2.0/2.2/2.5/2.8/3.0mm

Tool for fine hand drilling of holes.

1pc.

7.50 EUR^*

Art.-no. KaModel_RP-2

KaModel

Mini keyless drill chuck, for drills 0.3-3.6mm

1pc

36.50 EUR^*

Art.-no. KaModel_SN-SV2-1

KaModel

Screwdriver set SV2 with interchangeable bits

For various applications in the model making industry (e.g. locomotive maintenance, track bolting, etc.) and beyond.
The magnetizer and demagnetizer are integral parts of the stand. The screwdriver is of high quality, and its ball-bearing head makes screwdriving easier.

The set contains:
stand
Screwdriver SV2
Screwdriver bits:
- Flat 1.0mm
- Flat 1.5mm
- Flat 2.0mm
- Flat 2.5mm
- Flat 3.0mm
- Flat 3.5mm
- Cross PH0000
- Cross PH000
- Cross PH00
- Cross PH0
- Cross PH1
- Cross PH2
- torx T5
- torx T7
- torx T10
- torx T15

- Hexagon (Allen) H0.7
- Hexagon (Allen) H0.9
- Hexagon (Allen) H1.0
- Hexagon (Allen) H1.3
- Hexagon (Allen) H1.5
- Hexagon (Allen) H2.0
- Hexagon (Allen) H2.5
- External hexagon 2.5mm
- External hexagon 3.0mm
- External hexagon 3.5mm
- External hexagon 4.0mm
- External hexagon 4.5mm
- External hexagon 5.0mm
- External hexagon 5.5mm

49.60 EUR^*

Art.-no. KaModel_SN-SV2-2

KaModel

Screwdriver set SV2 with interchangeable bits

For various applications in the model making industry (e.g. locomotive maintenance, track bolting, etc.) and beyond.
The magnetizer and demagnetizer are integral parts of the stand. The screwdriver is of high quality, and its ball-bearing head makes screwdriving easier.

The set contains:
stand
3x screwdriver SV2
Screwdriver bits:
- Flat 1.0mm
- Flat 1.5mm
- Flat 2.0mm
- Flat 2.5mm
- Flat 3.0mm
- Flat 3.5mm
- Cross PH0000
- Cross PH000
- Cross PH00
- Cross PH0
- Cross PH1
- Cross PH2
- torx T5
- torx T7
- torx T10
- torx T15

- Hexagon (Allen) H0.7
- Hexagon (Allen) H0.9
- Hexagon (Allen) H1.0
- Hexagon (Allen) H1.3
- Hexagon (Allen) H1.5
- Hexagon (Allen) H2.0
- Hexagon (Allen) H2.5
- External hexagon 2.5mm
- External hexagon 3.0mm
- External hexagon 3.5mm
- External hexagon 4.0mm
- External hexagon 4.5mm
- External hexagon 5.0mm
- External hexagon 5.5mm

21.20 EUR^*

Art.-no. KaModel_SN-SV2-3

KaModel

Screwdriver set SV2 with interchangeable bits

For screwing in small hexagon screws or nuts, e.g. in steam locomotive connecting rods.

The screwdriver is of high quality and screwing is made easier by a ball-bearing head.

The set contains:
stand
Screwdriver SV2
Screwdriver bits:
- External hexagon 2.5mm
- External hexagon 3.0mm
- External hexagon 3.5 mm
- External hexagon 4.0mm
- External hexagon 4.5mm
- External hexagon 5.0mm
- External hexagon 5.5 mm
- Flat 2.0mm

30.80 EUR^*

Art.-no. KaModel_SN-SVT-1

KaModel

SVT precision screwdriver set
For various applications in the model railway sector (e.g. locomotive maintenance, track screwing, etc.) and beyond.

The bits are precision-ground and hard-ground. Replacement bits and screwdrivers are also available for purchase. All other bits can also be mounted on the screwdriver.

The magnetizer and demagnetizer is an integral part of the stand.

The sentence includes:
- Stand (SN/SVT/3)
- Flat screwdriver 1.0mm (SVT/SL1.0)
- Flat screwdriver 1.4mm (SVT/SL1.4)
- Flat screwdriver 1.8mm (SVT/SL1.8)
- Phillips screwdriver 1.4mm (SVT/PH1.4)
- Phillips screwdriver 1.8mm (SVT/PH1.8)
- Replacement flat bit 1.0mm (SVT/BIT/SL1.0)
- Replacement flat bit 1.4mm (SVT/BIT/SL1.4)
- Replacement flat bit 1.8mm (SVT/BIT/SL1.8)
- Replacement Phillips bit 1.4mm (SVT/BIT/PH1.4)
- Replacement Phillips bit 1.8mm (SVT/BIT/PH1.8)

25.00 EUR^*

Art.-no. KaModel_SN-SVT-2

KaModel

SVT precision screwdriver set
For various applications in the model railway sector (e.g. locomotive maintenance, track screwing, etc.) and beyond.

The bits are precision-ground and hard-ground. Replacement bits and screwdrivers are also available for purchase. All other bits can also be mounted on the screwdriver.

The magnetizer and demagnetizer is an integral part of the stand.

The sentence includes:
- Stand (SN/SVT/3)
- Flat screwdriver 1.0mm (SVT/SL1.0)
- Flat screwdriver 1.4mm (SVT/SL1.4)
- Flat screwdriver 1.8mm (SVT/SL1.8)
- Phillips screwdriver 1.4mm (SVT/PH1.4)
- Phillips screwdriver 1.8mm (SVT/PH1.8)

4.80 EUR^*

Art.-no. KaModel_SVT-PH1.4

KaModel

Precision Phillips screwdriver 1.4mm for KaModel screw work
The bit is precision-ground and hard-ground. Replacement bits are also available for purchase. All other bits can be attached to the screwdriver.

For KaModel track screws with 1.0 and 1.2 mm diameter.

5.30 EUR^*

Art.-no. KaModel_V1-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black round head screw (HO/TT/N) Dimensions: Diameter: 1.0mm, Length: 5mm Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

10.60 EUR^*

Art.-no. KaModel_V1-250

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with wooden sleepers

Black round head screw (HO/TT/N)

Dimensions: Diameter: 1.0mm, Length 5mm, Head diameter: 1.8mm

250 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

19.00 EUR^*

Art.-no. KaModel_V1-500

KaModel

Miniature precision screws for fastening HO/TT/N track from all manufacturers, suitable for screwing into track with wooden sleepers.

Black round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length: 5mm
Head diameter: 1.8mm

Pack of 500

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible.

5.30 EUR^*

Art.-no. KaModel_V1S-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with concrete sleepers

Silver round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 5mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.

Screwed-in sleepers are barely visible
Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.

5.30 EUR^*

Art.-no. KaModel_V5-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 8mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

10.60 EUR^*

Art.-no. KaModel_V5-250

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with wooden sleepers

Black round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 8mm
Head diameter: 1.8mm

250 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

19.00 EUR^*

Art.-no. KaModel_V5-500

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 8mm
Head diameter: 1.8mm

500 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

5.30 EUR^*

Art.-no. KaModel_V5S-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with concrete sleepers

Silver round head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 8mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
Screwed-in sleepers are barely visible

5.30 EUR^*

Art.-no. KaModel_V7-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black countersunk head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 5mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
To countersink the screw into the collar, a recess is carefully made with a 1.8mm drill bit
Screwed-in sleepers are barely visible

10.60 EUR^*

Art.-no. KaModel_V7-250

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with wooden sleepers

Black countersunk head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 5mm
Head diameter: 1.8mm

250 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
To countersink the screw into the collar, a recess is carefully made with a 1.8mm drill bit
Screwed-in sleepers are barely visible

19.00 EUR^*

Art.-no. KaModel_V7-500

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black countersunk head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 5mm
Head diameter: 1.8mm

500 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
To countersink the screw into the collar, a recess is carefully made with a 1.8mm drill bit
Screwed-in sleepers are barely visible

5.30 EUR^*

Art.-no. KaModel_V7S-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with concrete sleepers

Silver countersunk head screw (HO/TT/N) Dimensions: Diameter: 1.0mm, Length: 5mm, Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in. To countersink the screw into the collar, carefully make a recess with a 1.8mm drill bit
Screwed-in sleepers are barely visible

5.30 EUR^*

Art.-no. KaModel_V8-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers suitable for screwing in tracks with wooden sleepers

Black countersunk head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 10mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in.
To countersink the screw into the collar, a recess is carefully made with a 1.8mm drill bit
Screwed-in sleepers are barely visible

5.30 EUR^*

Art.-no. KaModel_V8S-100

KaModel

Miniature precision screws for fastening HO/TT/N tracks of all manufacturers, suitable for screwing in tracks with concrete sleepers

Silver countersunk head screw (HO/TT/N)
Dimensions: Diameter: 1.0mm, Length 10mm
Head diameter: 1.8mm

100 pieces pack

Pre-drill the hole for the screw with a 0.9mm drill bit before screwing it in. To countersink the screw into the collar, carefully make a recess with a 1.8mm drill bit
Screwed-in sleepers are barely visible

1.00 EUR^*

Art.-no. KaModel_VR0.9

KaModel

HSS-R drill 0.9mm for various applications inside and outside the model making industry.

1.00 EUR^*

Art.-no. KaModel_VR1.5

KaModel

HSS-R drill 1.5mm for various applications inside and outside the model making industry.

1.00 EUR^*

Art.-no. KaModel_VR1.8

KaModel

HSS-R drill 1.8mm for various applications inside and outside the model making industry.