N-Scale 09/2025: Fleischmann, Laffont

489.90 EUR (RRP*)

329.99 EUR^*

Art.-no. Fleischmann_7770006

Fleischmann

Three-part electric ICE-T multiple unit train series 411 of Deutsche Bahn.

The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.

- Curve-dependent, automatic inclination of the car body
- Model equipped with two function decoders and one sound decoder
- Rigid close coupling with movable transitions between the carriages
- Digitally switchable light and sound functions

In 1994, Deutsche Bahn AG ordered tilting multiple units from a consortium of Bombardier, Deutscher Waggonbau, DUEWAG, Fiat and Siemens in order to be able to connect winding routes to the ICE network. The individual cars and components were manufactured in different factories. Due to the success of the concept, the order was increased again; the success of the multiple unit known as the ICE-T made it an important part of the long-distance fleet. It was important to the then young DB AG group to usher in a new era of long-distance transport with the new ICE-T and ICE 3 multiple units. The new and innovative design was intended to immediately make it clear to passengers that this was a completely new generation of vehicles, and the group had given the designers very few specifications at the time. It is therefore not surprising that the multiple units of the 411 and 415 series are still contemporary vehicles today and have already successfully undergone several redesigns. With a top speed of 230 km/h, they still meet the demands of the ICE network today and enjoy a high level of reliability.

359.90 EUR (RRP*)

249.99 EUR^*

Art.-no. Fleischmann_7760006

Fleischmann

Three-part electric ICE multiple unit train series 411 of Deutsche Bahn.

The set consists of a 1st class end car, type Apmzf 411.0, a dining car, type WRmz 411.2 and a 2nd class end car, type Bpmzf 411.5.

- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with movable transitions between the carriages
- With function decoders for light change (white/red) for both analogue and digital operation

In 1994, Deutsche Bahn AG ordered tilting multiple units from a consortium of Bombardier, Deutscher Waggonbau, DUEWAG, Fiat and Siemens in order to be able to connect winding routes to the ICE network. The individual cars and components were manufactured in different factories. Due to the success of the concept, the order was increased again; the success of the multiple unit known as the ICE-T made it an important part of the long-distance fleet. It was important to the then young DB AG group to usher in a new era of long-distance transport with the new ICE-T and ICE 3 multiple units. The new and innovative design was intended to immediately make it clear to passengers that this was a completely new generation of vehicles, and the group had given the designers very few specifications at the time. It is therefore not surprising that the multiple units of the 411 and 415 series are still contemporary vehicles today and have already successfully undergone several redesigns. With a top speed of 230 km/h, they still meet the demands of the ICE network today and enjoy a high level of reliability.

99.90 EUR (RRP*)

69.99 EUR^*

Art.-no. Fleischmann_7760007

Fleischmann

Supplementary set 1 with two intermediate carriages for the ICE multiple unit train series 411 of the Deutsche Bahn.

Consisting of a 1st/2nd class carriage, type ABpmz 411.1 and a 2nd class carriage, type Bpmz 411.8.

- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with movable transitions between the carriages

ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as series 411 and 415. These trains are designed for traffic on upgraded routes. Such routes usually have a higher gradient and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.

99.90 EUR (RRP*)

59.99 EUR^*

Art.-no. Fleischmann_7760008

Fleischmann

Supplementary set 2 with two intermediate carriages for the ICE multiple unit train series 411 of the Deutsche Bahn.

Consisting of a 2nd class carriage, type Bpmbz 411.6 and a 2nd class carriage, type Bpmz 411.7.

- Curve-dependent, automatic inclination of the car body
- Rigid close coupling with movable transitions between the carriages

ICE-T is the collective name for the high-speed trains used by Deutsche Bahn as series 411 and 415. These trains are designed for traffic on upgraded routes. Such routes usually have a higher gradient and numerous curves, which is why these multiple units are equipped with tilting technology. The maximum permitted speed of the ICE-T is 230 km/h.

169.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Fleischmann_721212

Fleischmann

Company number 847 957-8

Diesel locomotive Am 847 957 “Lotti” (ex DB 211 215) from Sersa AG.

- Finely detailed model with many separately attached plug-in parts
- Clear view of the driver's cab
- Brake shoes exactly at wheel arch level
- Finest handlebars and appearances

After the 211 series was retired from the Deutsche Bundesbahn, a few locomotives were also purchased from Sersa AG. The Swiss railway technology group specializes in the superstructure of railway tracks. The classic core activities include track construction and track maintenance, as well as the construction of overhead lines and electrical systems, measuring systems for railways and the project management of railway technology projects.

219.90 EUR (RRP*)

197.91 EUR^*

Art.-no. Fleischmann_7360030

Fleischmann

Diesel locomotive 120 272 of the Deutsche Reichsbahn.

- Version with wide chrome strip under the front windows
- Finely detailed model with separately attached plug-in parts
- Roof variant with silencer
- Home RBD Dresden, Bw Dresden

The V 200, later renamed the Class 120, with its 1,470 kW, is ideally suited for freight train service. This locomotive was the proven M 62 model, which had been delivered to Soviet and foreign railways in Luhansk (Ukraine) for years. From 1966 to 1975, the German Reichsbahn (DR) purchased a total of 378 locomotives of this class.

319.90 EUR (RRP*)

287.91 EUR^*

Art.-no. Fleischmann_7370030

Fleischmann

Diesel locomotive 120 272 of the Deutsche Reichsbahn.

- Version with wide chrome strip under the front windows
- Finely detailed model with separately attached plug-in parts
- Roof variant with silencer
- Home RBD Dresden, Bw Dresden
- Digitally switchable sound functions

The V 200, later renamed the Class 120, with its 1,470 kW, is ideally suited for freight train service. This locomotive was the proven M 62 model, which had been delivered to Soviet and foreign railways in Luhansk (Ukraine) for years. From 1966 to 1975, the German Reichsbahn (DR) purchased a total of 378 locomotives of this class.

52.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_6260033

Fleischmann

1st class express train carriage, type Am 203, of the Deutsche Bundesbahn.

- Version in ocean blue/beige color scheme

52.90 EUR (RRP*)

44.91 EUR^*

Art.-no. Fleischmann_6260034

Fleischmann

1st/2nd class express train carriage, type ABm 225, of the Deutsche Bundesbahn.

- Version in ocean blue/beige colour scheme

52.90 EUR (RRP*)

44.91 EUR^*

Art.-no. Fleischmann_6260035

Fleischmann

2nd class express train carriage, type Bm 235, of the Deutsche Bundesbahn.

- Version in ocean blue/beige colour scheme
- Item No. 6260036: Changed company number

52.90 EUR (RRP*)

44.91 EUR^*

Art.-no. Fleischmann_6260036

Fleischmann

2nd class express train carriage, type Bm 235, of the Deutsche Bundesbahn.

- Version in ocean blue/beige color scheme
- Item No. 6260035: Changed operating number

52.90 EUR (RRP*)

47.61 EUR^*

Art.-no. Fleischmann_6260037

Fleischmann

2nd class express train carriage with baggage compartment, type BDms 273, of the Deutsche Bundesbahn.

- Version in ocean blue/beige colour scheme

42.90 EUR (RRP*)

24.99 EUR^*

Art.-no. Fleischmann_6260038

Fleischmann

Apron dining car, type WRüge, of the Deutsche Bundesbahn.

- Era IV version in ocean blue-beige paintwork

From 1936, the Deutsche Reichsbahn-Gesellschaft put streamlined express train carriages into service. Windows and doors were completely flush with the outer wall of the carriage, the side walls were pulled down beyond the actual end of the carriage and between the bogies. The "skirt carriages" thus achieved a significant reduction in air resistance. In 1974, eight skirted dining cars were painted ocean blue and beige.

157.90 EUR (RRP*)

99.99 EUR^*

Art.-no. Hobbytrain_H28016

Hobbytrain

The E10 belongs to the family of standard locomotives and was built for the German Federal Railway from 1952. The four-axle machines were initially used in high-quality passenger traffic in front of express and express trains. A new, streamlined locomotive body was designed for the Rheingold locomotives in 1962, which was also used on the series engines from E10 288 onwards. The kink at the front gave the locomotive its nickname “Bügelfalte”. From then on, the locomotives were listed as E10.3 on the Deutsche Bundesbahn. From the 1990s onwards, the range of uses for the locomotive, known as the 110 series from 1968, shifted towards local transport. Many machines were therefore equipped with push-pull controls.

Company number: 110 297
GB Traction Frankfurt (M)
Operating condition 1995

Model features:
- Current consumption across all axes
- NEM 651 interface
- Light changes red/white
- Consideration of all design differences in detail
- LUP: 104 mm

259.90 EUR (RRP*)

179.99 EUR^*

Art.-no. Hobbytrain_H28016S

Hobbytrain

The E10 belongs to the family of standard locomotives and was built for the German Federal Railway from 1952. The four-axle machines were initially used in high-quality passenger traffic in front of express and express trains. A new, streamlined locomotive body was designed for the Rheingold locomotives in 1962, which was also used on the series engines from E10 288 onwards. The kink at the front gave the locomotive its nickname “Bügelfalte”. From then on, the locomotives were listed as E10.3 on the Deutsche Bundesbahn. From the 1990s onwards, the range of uses for the locomotive, known as the 110 series from 1968, shifted towards local transport. Many machines were therefore equipped with push-pull controls.

Company number: 110 297
GB Traction Frankfurt (M)
Operating condition 1995

Model features:
- Current consumption across all axes
- NEM 651 interface
- Light changes red/white
- with factory-installed sound board
- Consideration of all design differences in detail
- LUP: 104 mm

29.66 EUR^*

Art.-no. Lemke_LC4660

Lemke

MAN F90 3-axle garbage truck with rotating axles, window insert and beautifully printed.

159.90 EUR^*

Art.-no. Laffont_N10001

Laffont

This laser cut kit contains:

1x item no. N3701, 2x item no. N5101, 1x item no. N9701, 1x item no. N9801, 1x item no. N9901

7.90 EUR^*

Art.-no. Laffont_N10101

Laffont

This laser cut kit contains:

- Gate can be displayed closed and open
- Era II-VI
- Material: solid-colored architectural hardboard

139.90 EUR^*

Art.-no. Laffont_N10201

Laffont

This laser cut kit contains:

- Half-relief model of the Art Nouveau building on the entrance side (station forecourt)
- Supplement with Art. No. N8401 (Aachen Central Station as a half-relief model) to a complete building
- finest, irregular quarry stone engravings
- Era II-VI
- Material: solid-colored architectural hardboard

74.90 EUR^*

Art.-no. Laffont_N10301

Laffont

This laser cut kit contains:

- with earth bunker for 2 tracks (left and right of the layout)
- finest engravings of the T-profiles
- realistic shovel chains
- Era II-III
- Material: solid-colored architectural hardboard
- Track spacing 59mm (center to center)

59.90 EUR^*

Art.-no. Laffont_N10401

Laffont

This laser cut kit contains:

- 3-stall engine shed, which can be attached side by side
- Track center distance suitable for turntable 66570 (15-degree pitch)
- suitable for overhead line operation
- suitable for locomotives up to 130 mm long via couplings (with the gate closed)
- Kit made of solid-colored architectural hardboard

18.90 EUR^*

Art.-no. Laffont_N10701

Laffont

This laser cut kit contains:

- Original shelter of the Wismar rail bus ('Schweineschnäuzchen')
- Model from Bohmte (Lower Saxony), also for loading and unloading milk cans on the vehicle roof
- finest wood and roof engravings
- Era II-VI
- Material: solid-colored architectural hardboard / dark-stained plywood

11.90 EUR^*

Art.-no. Laffont_N10901

Laffont

This laser cut kit contains:

- Fence length 456mm
- Height 8mm
- with 16 advertising signs
- Era II-V
- Material: solid-colored architectural hardboard

249.90 EUR^*

Art.-no. Laffont_N11001

Laffont

This laser cut kit contains:

- Art Nouveau building of the railway junction station in the border triangle of the Netherlands, Belgium and Germany
- the gateway to Europe with important international long-distance connections
- finest, irregular quarry stone engravings
- Era II-VI
- Material: solid-colored architectural hardboard

31.90 EUR^*

Art.-no. Laffont_N11401

Laffont

This laser cut kit contains:

- extendable side by side and one behind the other
- with central platform
- without tracks, without vehicles
- for 2 tracks, also 3 tracks at closer distance possible
- Era II-VI
- Material: solid-colored architectural hardboard
- Passage dimensions (WxH): 62x38mm

34.90 EUR^*

Art.-no. Laffont_N11701

Laffont

This laser cut kit contains:

- highly fine and detailed kit model
- without bridge piers, without tracks, without vehicles - with finely engraved rivet representations
- 1-track, length 290mm
- Era II-VI
- high resilience
- Material: solid-colored architectural hardboard

34.90 EUR^*

Art.-no. Laffont_N11721

Laffont

This laser cut kit contains:

- highly fine and detailed kit model
- without bridge piers, without tracks, without vehicles
- with finely engraved rivet images
- 1-track, length 290mm
- Era II-VI
- high resilience
- Material: solid-colored architectural hardboard

49.90 EUR^*

Art.-no. Laffont_N12001

Laffont

This laser cut kit contains:

- 3-stall engine shed, which can be attached side by side
- prototypical without gates in the entrance area
- Track center distance suitable for turntable 66570 (15-degree pitch)
- suitable for overhead line operation
- suitable for locomotives up to 130 mm long via couplings
- Kit made of solid-colored architectural hardboard

12.90 EUR^*

Art.-no. Laffont_N12401

Laffont

This laser cut kit contains:

- Delivery quantity 2 pieces
- without rails
- elaborate rivet engravings at the nodes of the stiffening plates
- Era II-V
- Shifted steel beams or other loads on stake or flat wagons could be reattached without a crane
- Material: solid-coloured architectural hardboard, wood

34.90 EUR^*

Art.-no. Laffont_N1301

Laffont

This laser cut kit contains:

- 2 facade colors included for Waldangelloch (ground floor white) and Rauenberg (beige, mirror image)
- Reproduction of the following stations is also possible: Baiertal, Dielheim, Schatthausen
- Era II-IV
- finest brick and roof tile engravings
- Material: solid-colored architectural hardboard

18.90 EUR^*

Art.-no. Laffont_N1401

Laffont

This laser cut kit contains:

- typical huts from the railway area
- Ep. I-VI
- Material: solid-colored architectural hardboard
- Booth in aged wood look with fine engravings 53x16x18mm
- Brick hut finely engraved 38x16x18mm
- Corrugated iron hut green 19x16x18mm

15.90 EUR^*

Art.-no. Laffont_N1501

Laffont

This laser cut kit contains:

- usable e.g. as a guard's house, gatehouse, workshop or small business
- Era II-VI
- finest roof tile engravings
- Material: solid-colored architectural hardboard

16.90 EUR^*

Art.-no. Laffont_N1601

Laffont

This laser cut kit contains:

- usable e.g. as a guard's house, gatehouse, workshop or small business
- Era II-VI
- finest brick and roof tile engravings
- Material: solid-colored architectural hardboard

69.90 EUR^*

Art.-no. Laffont_N1701

Laffont

This laser cut kit contains:

- can be found at numerous inland ports in North Rhine-Westphalia
- Era III-VI
- two-tone plaster surface
- New publication of the year 2018 in the magazine Trainini in Z gauge
- Material: solid-colored architectural hardboard

92.90 EUR^*

Art.-no. Laffont_N1811

Laffont

This laser cut kit contains:

- outer brick facade in dark red color
- found at numerous inland ports
- Era II-VI
- two-tone brick facade finely engraved
- New publication of the year 2018 in the magazine Trainini in Z gauge
- Material: solid-colored architectural hardboard

92.90 EUR^*

Art.-no. Laffont_N1821

Laffont

This laser cut kit contains:

- outer brick facade in dark purple color
- found at numerous inland ports
- Era II-VI
- two-tone brick facade finely engraved
- New publication of the year 2018 in the magazine Trainini in Z gauge
- Material: solid-colored architectural hardboard

16.90 EUR^*

Art.-no. Laffont_N1901

Laffont

This laser cut kit contains:

- typical multi-purpose garages of the 1950s
- Gates can be opened
- Era II-V
- Material: solid-colored architectural hardboard

29.90 EUR^*

Art.-no. Laffont_N2201

Laffont

This laser cut kit contains:

- Apartment building based on the southern German model
- with fine roof tile engravings
- usable for epochs II to VI
- Material: solid-colored architectural hardboard

25.90 EUR^*

Art.-no. Laffont_N2301

Laffont

This laser cut kit contains:

- based on the Heilbronn depot
- typical building in depots for the accommodation and allocation of locomotive personnel - with fine roof tile engravings
- usable for epochs II to V
- Material: solid-colored architectural hardboard

41.90 EUR^*

Art.-no. Laffont_N301

Laffont

This laser cut kit contains:

- typical machine or factory hall
- based on a model building in the old waterworks in Heilbronn
- realistic brick facade
- Era I-VI
- finest brick engravings
- Material: solid-colored architectural hardboard

41.90 EUR^*

Art.-no. Laffont_N311

Laffont

This laser cut kit contains:

- typical machine or factory hall
- based on a model building in the old waterworks in Heilbronn
- realistic brick facade
- Era I-VI
- finest brick engravings
- Material: solid-colored architectural hardboard

26.90 EUR^*

Art.-no. Laffont_N3301

Laffont

This laser cut kit contains:

- Gates can be displayed open/half-open
- Era IV-VI
- Material: solid-colored architectural hardboard

31.90 EUR^*

Art.-no. Laffont_N3401

Laffont

This laser cut kit contains:

- with plastered facade and contrasting window frames
- mechanical signal box from the Palatinate Forest, built in 1940
- Era II-V
- finest roof tile engravings
- with interior furnishings
- Material: solid-colored architectural hardboard

34.90 EUR^*

Art.-no. Laffont_N3501

Laffont

This laser cut kit contains:

- with sandstone facade and wooden cladding in the window row
- mechanical signal box from the Palatinate Forest, built in 1940
- Era II-V
- finest sandstone and roof tile engravings
- with interior furnishings
- Material: solid-colored architectural hardboard

46.90 EUR^*

Art.-no. Laffont_N3701

Laffont

This laser cut kit contains:

- Model near Heidelberg
- 2-storey building with gable roof, with partial timber framing and timber cladding in the gable area
- Era II-VI
- finest roof tile engravings
- Material: solid-colored architectural hardboard

8.90 EUR^*

Art.-no. Laffont_N3801

Laffont

This laser cut kit contains:

- Checkered plates for depot and workshop areas
- contains 3 checker plates with the dimensions (LxWxH): 150mm x 6mm x 0.5mm
- and 3 underlay strips with the dimensions (LxWxH): 150mm x 5mm x 0.9mm
- finest engravings
- Material: solid-colored architectural hardboard
- Track not included

14.90 EUR^*

Art.-no. Laffont_N4601

Laffont

This laser cut kit contains:

- Height 56mm
- stone grey color
- Dimensions 1 bridge pier (LxWxH): 43x20x56mm
- elaborate, finest quarry stone engravings
- suitable for the truss bridges N11701 and N11721, also for other bridges
- Material: solid-colored architectural hardboard

14.90 EUR^*

Art.-no. Laffont_N4611

Laffont

This laser cut kit contains:

- Height 56mm
- grey-beige color
- Dimensions 1 bridge pier (LxWxH): 43x20x56mm
- elaborate, finest quarry stone engravings
- suitable for the truss bridges N11701 and N11721, also for other bridges
- Material: solid-colored architectural hardboard

49.90 EUR^*

Art.-no. Laffont_N5001

Laffont

This laser cut kit contains:

- Replica of the Kluppeneggerhof in Austria, the birthplace of Peter Rosegger
- Era II-VI
- Wall partitions
- finest stone and roof tile engravings
- Material: dark stained wood and solid-colored architectural cardboard

23.90 EUR^*

Art.-no. Laffont_N501

Laffont

This laser cut kit contains:

- finest roof tile engravings
- Era II-VI
- Doors and gates can be displayed open
- Material: solid-colored architectural hardboard

26.90 EUR^*

Art.-no. Laffont_N502

Laffont

This laser cut kit contains:

- finest brick and roof tile engravings
- Era II-VI
- Doors and gates can be displayed open
- Material: solid-colored architectural hardboard

24.90 EUR^*

Art.-no. Laffont_N5101

Laffont

This laser cut kit contains:

- Model near Heidelberg
- Era II-VI
- finest roof tile engravings
- Material: solid-colored architectural hardboard
- with advertising sticker 'Glasurit' (Epoch III)

35.90 EUR^*

Art.-no. Laffont_N5401

Laffont

This laser cut kit contains:

- typical railway post hall from the 1960s and 1970s for loading weather-sensitive mail
- can be extended as required, side by side and one behind the other by omitting the back wall
- Can be mounted sideways and mirrored
- Era III-V
- Material: solid-colored architectural hardboard

56.90 EUR^*

Art.-no. Laffont_N6801

Laffont

This laser cut kit contains:

- Model of the Swiss railway station between Filisur and Davos - presented by the RhB as one of the 5 most beautiful railway stations in the Rhaetian network - finest roof tile engravings, finest quarry stone engravings on the loading ramp
- engraved wooden tenons on both sides
- Era I-VI
- Material: solid-colored architectural hardboard / dark-stained plywood

52.90 EUR^*

Art.-no. Laffont_N6901

Laffont

This laser cut kit contains:

- Swiss Restaurant Wiesen
- fine, two-tone window frames
- Outdoor terrace with fence
- Era II-VI
- finest roof tile engravings
- Material: solid-colored architectural hardboard

52.90 EUR^*

Art.-no. Laffont_N7001

Laffont

This laser cut kit contains:

- Swiss semi-detached house Wiesen
- typical Swiss village building
- fine, two-tone window frames, white and dark brown
- Era II-VI
- finest base and roof tile engravings
- Material: solid-colored architectural hardboard / dark-stained plywood

28.90 EUR^*

Art.-no. Laffont_N8001

Laffont

This laser cut kit contains:

- Authentic loading crane with fine corrugated iron replica - Passage of 3 tracks possible
- Passage WxH: 92x52mm
- Era II-VI
- transparent thread for crane hook included
- Material: solid-colored architectural hardboard

54.90 EUR^*

Art.-no. Laffont_N801

Laffont

This laser cut kit contains:

- typical administrative building of a government agency or large company from the 1950s/1960s
- Era III-V
- with wall and floor separations
- fine roof engravings, numerous details - Material: solid-colored architectural hardboard

27.90 EUR^*

Art.-no. Laffont_N8101

Laffont

This laser cut kit contains:

- French town hall in the heart of Normandy
- finest engravings on the friezes
- with interior walls
- Era II-VI
- Material: solid-colored architectural hardboard

139.90 EUR^*

Art.-no. Laffont_N8401

Laffont

This laser cut kit contains:

- Half-relief model of the Art Nouveau building on the railway side
- with platform, staircase and maintenance walkway
- finest, irregular quarry stone engravings
- Supplement with Art. No. N10201 (Aachen Central Station, people side as a half-relief model) to a complete building
- Era II-VI
- Material: solid-colored architectural hardboard

55.90 EUR^*

Art.-no. Laffont_N901

Laffont

This laser cut kit contains:

- Ruhr coal mine building in the architectural style of the 1930s
- Steel framework red
- Central Workshop Zollverein Coal Mine Industrial Complex Essen
- Era II-VI
- Wall partitions
- Material: solid-colored architectural hardboard

55.90 EUR^*

Art.-no. Laffont_N902

Laffont

This laser cut kit contains:

- Ruhr coal mine building in the architectural style of the 1930s
- Green steel framework
- Lohberg mine, Dinslaken
- Era II-VI
- Wall partitions
- Material: solid-colored architectural hardboard

41.90 EUR^*

Art.-no. Laffont_N9101

Laffont

This laser cut kit contains:

- Turntable dummy without tracks
- without vehicles, without tracks
- Stage can be rotated manually, but without drive
- 5 track exits (2x 15 degrees, 90 degrees) planned
- further exits at any angle possible through simple cuts
- Stage length 120mm
- Diameter for countersunk installation 150mm
- Material: solid-colored architectural hardboard

29.90 EUR^*

Art.-no. Laffont_N9301

Laffont

This laser cut kit contains:

- typical framework design for a branch line depot
- Servo drive of the gates from below possible
- Inner length 103mm
- Clearance height 38mm
- Passage width 24mm
- Era II-VI
- Material: solid-colored architectural hardboard

44.90 EUR^*

Art.-no. Laffont_N9401

Laffont

This laser cut kit contains:

- 4 movable gates
- Track spacing 33.6mm
- Height of gate passage 38mm
- Inner length 161mm
- Passage width 24mm
- suitable for overhead line operation with slightly lowered contact wire
- finest roof tile engravings
- Era II-VI
- Material: solid-colored architectural hardboard

35.90 EUR^*

Art.-no. Laffont_N9501

Laffont

This laser cut kit contains:

- rustic city gate from the Altmühltal
- rear staircase with wooden paneling
- finest roof tile engravings
- Clearance height 17mm
- Passage width 15mm
- with weather vane
- Era I-VI
- Material: solid-colored architectural hardboard / dark-stained plywood

39.90 EUR^*

Art.-no. Laffont_N9601

Laffont

This laser cut kit contains:

- Single-family house with upper floor, dimensions (LxWxH): 41x34x54mm
- Half-timbered house, dimensions (LxWxH): 53x31x36mm
- Yard building/workshop, dimensions (LxWxH): 93x35x44mm
- Attachment, dimensions (LxWxH): 21x17x18mm
- Bus stop, dimensions (LxWxH): 17x17x19mm

28.90 EUR^*

Art.-no. Laffont_N9701

Laffont

This laser cut kit contains:

- large railway guard's house with an extension and third gable
- finest roof engravings - authentic building of the Badische Odenwaldbahn
- Era I-VI- Material: solid-colored architectural hardboard

36.90 EUR^*

Art.-no. Laffont_N9801

Laffont

This laser cut kit contains:

- Combination of 'economy building' and 'privy building' - finest roof tile engravings - authentic building of the Badische Odenwaldbahn
- with prototypical privacy fence, length 115mm - Era I-VI - Material: solid-colored architectural hard cardboard

16.90 EUR^*

Art.-no. Laffont_N9901

Laffont

This laser cut kit contains:

- frequently used guard hut/communication hut
- Package contents 2 pieces
- authentic buildings of the Badische Odenwaldbahn
- Era I-VI- Material: solid-colored architectural hardboard / dark-stained plywood

19.99 EUR^*

Art.-no. MU_N-H00240

Modellbahn Union

The modern clinic/hospital is equipped with 6 levels and 30 rooms in the interior, where lighting can be installed independently of each other. The barrier-free entrance provides realistic access for wheelchair users and walker users. This small clinic/hospital allows for realistic use on the facility and does not take up too much space. If you still want to recreate a larger clinic, you can use additional buildings creatively. Extensions to clinics in which individual parts of the building differ are quite realistic. An additional design suggestion would be a large parking lot in front of the building.

19.99 EUR^*

Art.-no. MU_N-H00371

Modellbahn Union

The modern clinic/hospital is equipped with 6 levels and 30 rooms in the interior, where lighting can be installed independently of each other. The barrier-free entrance provides realistic access for wheelchair users and walker users. This small clinic/hospital allows for realistic use on the facility and does not take up too much space. If you still want to recreate a larger clinic, you can use additional buildings creatively. Extensions to clinics in which individual parts of the building differ are quite realistic. An additional design suggestion would be a large parking lot in front of the building.

6.99 EUR^*

Art.-no. MU_N-L00311

Modellbahn Union

The landing site can be placed both separately and on the roof of a building with the appropriate dimensions.

14.99 EUR^*

Art.-no. MU_N-L00312

Modellbahn Union

The kit can be placed both separately and on the roof of a building (such as MU_N-H00240 Clinic) with the appropriate dimensions.

When installing on the roof of the clinic it may be necessary to move or remove some parts e.g. ventilation, house

14.99 EUR^*

Art.-no. MU_N-L00313

Modellbahn Union

The kit can be placed both separately and on the roof of a building with the appropriate dimensions.