N-Scale 09/2025: Lemke, Mafen, Noch, Preiser, Auhagen, Minitrix

44.99 EUR (RRP*)

31.23 EUR^*

Art.-no. Minitrix_15500

Minitrix

Prototype: German Federal Railroad's Taes 890. Year of construction from 1965.
Model: Era IV, with close coupling mechanism. On the underside of the vehicle is a holder with rail cleaning felt according to the Jörger system. The cleaning felts are washable at 30 °. 2 replacement felts included. Length over the buffers 88 mm.

69.99 EUR (RRP*)

55.99 EUR^*

Art.-no. Minitrix_18055

Minitrix

Prototype: 1st/2nd class, Deutsche Bahn AG (German Rail) DABz. Built starting in 1993. Use: Regional express trains.

Model: With kinematics for close coupling.
Length over buffers 167 mm.

69.99 EUR (RRP*)

55.99 EUR^*

Art.-no. Minitrix_18056

Minitrix

Prototype: 2nd class, DBz of the Deutsche Bahn AG. Built from 1993. Use: Regional express trains.

Model: With kinematics for close coupling. Length over buffers 167 mm. Car from the My Hobby series

119.00 EUR (RRP*)

95.20 EUR^*

Art.-no. Minitrix_18057

Minitrix

Prototype: 2nd class double-decker control car, type DBpbzfa 765.5 of the Deutsche Bahn AG. Built starting in 2003.

Model: With kinematics for close coupling, white/red light changeover via LED on the control compartment side and a function decoder. The headlight works in analogue mode.
Length over buffers 167 mm.

37.90 EUR (RRP*)

36.01 EUR^*

Art.-no. Fleischmann_6660015

Fleischmann

Sliding wall wagon "FLEISCHMANN Clean" for rail cleaning of the Deutsche Bundesbahn.

- Just let it run along in a train
- Rails always in top condition

Track cleaning trolley with a real cleaning effect. Dust, rubber abrasion, oil, etc. are reliably removed. The rail surface is not attacked, so that new dirt does not settle again so quickly.

37.80 EUR (RRP*)

19.99 EUR^*

Art.-no. Lemke_LC3235

Lemke

From 1952, the Opel Blitz, which was built from 1930, received a new, contemporary look. The design was very similar to the American pickup trucks of the time. The vehicle, now designed for a payload of 1.75 tons, was available as a panel van and a flatbed truck. In addition, special structures such as turntable ladders, towing cranes and beverage pallets were also offered. The vehicle, popularly known as Weichblitz, was powered by a six-cylinder gasoline engine and had an impressive 58 hp.

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3958

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3959

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3962

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3964

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3966

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3967

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

15.50 EUR (RRP*)

13.95 EUR^*

Art.-no. Lemke_LC3969

Lemke

The VW T2 is the second generation of the VW Transporter, which has completed VW's model range since 1950. In 1967, the second series replaced its predecessor, the VW T1, and was produced until 1979. Over 2.5 million units of the VW T2 were sold during its twelve-year production run. To this day, the Bulli maintains cult status and exists in various versions.
Length: 29mm

49.90 EUR^*

Art.-no. Auhagen_14490

Auhagen

Functional model. The old, listed tower Dutch windmill stands in a picturesque setting directly on the Elbe Cycle Path in Dresden-Gohlis. Built by the landowner Hefter from 1828 to 1832, the windmill is now used as a museum and restaurant and served as the model for the authentic implementation of our model. For a particularly realistic design, the motor (item no. 58 200) can be integrated with laser-cut parts during construction of the plastic model, thus driving the impeller.
Original model

Diameter 67 mm
Height 87 / 121 mm

19.90 EUR^*

Art.-no. Auhagen_14491

Auhagen

Two corrugated iron huts of typical construction, such as those used as oil storage facilities on factory premises or in railway areas.
The accessories include a ramp made of sturdy cardboard using laser-cut technology and several barrels for decoration.

The sheds can be placed flexibly and are versatile in their use.

Corrugated iron hut each 24 x 15 x 17 mm
Barrel ramp 28 x 5 x 6.5 mm

19.90 EUR^*

Art.-no. Auhagen_44659

Auhagen

Kit. The Deutz F1M414 tractor, built from 1936 onwards, enabled the mechanization of even smaller farms thanks to its low purchase price. With 20,000 units sold, it was a common sight. The delicate model, equipped with authentic tires, is based on the original pre-war 3-speed version and can be used on any model railway layout. The combination is complemented by a trailer for Multicar/small tractors.

tractor 14 x 10 x 9 mm
Pendant 21 x 8 x 7 mm

24.99 EUR (RRP*)

22.49 EUR^*

Art.-no. Faller_222150

Faller

Water tower with some decoration parts typical of the railway area such as axles, sleeper stacks, corrugated iron shacks, water cranes, turnout levers and buffer stops.

This kit contains: 55 items in 4 colors and 1 construction manual.

49.99 EUR (RRP*)

39.99 EUR^*

Art.-no. Faller_239010

Faller

The wind gently carries the sound of church bells over the peaceful miniature village. It comes from a small white village church with a steep roof, which watches over the scenery. Right next door is a charming, stone detached house with a small front garden and a fountain with a figurine. In the adjacent greenhouses, all kinds of plants are sprouting and blooming. A rural idyll in miniature. Contents: Village church, brick house, 2 greenhouses, village fountain.

This kit contains: 304 individual parts in 15 colors, window film, 2 curtain masks, and 4 assembly instructions. Use FALLER EXPERT plastic glue for assembly.

Dimensions: 128 x 115 x 170 mm, 76 x 76 x 55 mm, 98 x 46 x 30 mm, 72 x 42 x 40 mm, 26 x 26 x 30 mm

3.99 EUR^*

Art.-no. Kestrel_GMKD89

Kestrel

PROTOTYPE
Pay and display machines have replaced the original parking machines and can now be found in all paid parking areas across the country. Their use has increased as they serve a larger area and multiple plazas, making installation, maintenance and replacement faster and easier than their predecessors. They can be found in street parking lots and parking garages, but also in older parking garages and shopping malls.

MODEL
This pack contains two photopolymer resin pay stations. They are already painted and can be used directly from the pack on the layout.

16.90 EUR^*

Art.-no. Mafen_381001

Mafen

It is a series of lanterns that reproduce classic models in the strict 1/160 scale and are designed to enrich model railways.

35.90 EUR (RRP*)

16.90 EUR^*

Art.-no. Mafen_381006

Mafen

It is a series of lanterns that reproduce classic models in the strict 1/160 scale and are designed to enrich model railways.

49.90 EUR (RRP*)

14.90 EUR^*

Art.-no. Mafen_381007

Mafen

It is a series of lanterns that reproduce classic models in the strict 1/160 scale and are designed to enrich model railways.

16.90 EUR^*

Art.-no. Mafen_381008

Mafen

It is a series of lanterns that reproduce classic models in the strict 1/160 scale and are designed to enrich model railways.

36.90 EUR^*

Art.-no. Mafen_4134.202

Mafen

Light signal, blocking signal, DB

Completely ready for connection with SMD LEDs and resistors for 16 volts DC

Finely lacquered prefabricated building

161.91 EUR^*

Art.-no. Noch_60120

Noch

NOCH Gras-Master 4.0 – Electrostatic grassing made easy
The NOCH Gras-Master 4.0 takes electrostatic grassing in model landscaping to a new level! The fourth generation is available in two versions and boasts innovative features such as an integrated battery and the practical flock interchangeable container system. Thanks to a permanent voltage of 15 kV (Gras-Master 4.0), the Gras-Master is one of the most powerful devices on the market. Whether short or long grass fibers – the Gras-Master masters all challenges effortlessly.

Highlights of the NOCH Grass Master 4.0

- Powerful: Permanent voltage of 15 kV.
- Environmentally friendly: Integrated battery with up to 4 hours of runtime.
- Innovative system: Flock interchangeable container with bayonet lock for fast and clean work.
- Versatile: Process grass fibers from all manufacturers, from short fibers to 12 mm length.

With the new Flock interchangeable container system, you can create seamless transitions between grass types and save valuable time. Ideal for beginners and professionals who want to achieve first-class results in model making. The Gras-Master 4.0 is the perfect choice for all model builders!

Contents:
- 1 Grass Master 4.0
- 1 flock interchangeable container including 3 sieves
- 1 lid
- 1 USB-C cable (without charger)

19.99 EUR^*

Art.-no. Noch_60127

Noch

The standard flock swap body from NOCH!
Fits Gras-Master 4.0 and Gras-Master 4.0 PROFI. With a bayonet lock for quick, easy grass fiber changes.
The transparent container allows you to see the remaining amount of grass fibers at any time.

Contents:
- Swap body
- 3 sieves
- 1 lid

29.99 EUR^*

Art.-no. Noch_60128

Noch

NOCH Detail Flocker – Perfect grassing in hard-to-reach places
With the NOCH Detail Flocking Machine, you can effortlessly and professionally decorate even hard-to-reach areas, such as under bridges or between buildings. The flexible hose and mini container ensure precise results, while the bayonet lock allows for quick changes of grass fibers. Thanks to the transparent design, you can always see the fill level. The container also serves as a neat storage solution.

The detail flocker is suitable for the NOCH Gras-Master 4.0 and 4.0 PROFI and is ideal for model builders who value perfect details.

Including:
- 3 sieves
- 1 lid

34.99 EUR^*

Art.-no. Noch_60129

Noch

NOCH XL Flock Interchangeable Container – For large-scale greening
The NOCH XL Flock Swap Body is the ideal addition to the Gras-Master 4.0 and the Gras-Master 4.0 PROFI. With its generous capacity, it allows you to cover large areas with grass without frequent refilling.

Thanks to the practical bayonet lock, grass fibers can be changed quickly and easily. This saves time and ensures perfect transitions between different grass areas. The transparent container shows the fill level at all times and also serves as a safe storage space for grass fibers.

The XL flock interchangeable container is the perfect choice for model builders who want to work efficiently and precisely.

Including:
- 3 sieves
- 1 lid

29.99 EUR^*

Art.-no. Noch_60137

Noch

NOCH Grass Stamps – Realistic grass areas made easy
NOCH Grass Stamps are innovative tools for creating natural and varied grass landscapes. Combined with NOCH Grass Glue and a Grass Master, you can effortlessly create realistic surfaces with varying heights and textures.

The set includes two stamp sizes: a large one for wide meadows and a small one for precise work, such as on railway embankments. The included adhesive tray facilitates application. After use, simply clean the stamps with water.

Perfect for beginners and professionals – for impressive model landscapes!

Contents:
- 1 large grass stamp
- 1 small grass stamp
- 1 adhesive tray

9.79 EUR^*

Art.-no. Noch_61130

Noch

250 ml can
NOCH grass glue has been specially developed for electrostatic flocking. Compared to normal white glue, it has a lower surface tension and binds more slowly.

The advantages: The electrostatically charged grass fibers have a perfect upright position and the area can be extended longer.

48.99 EUR^*

Art.-no. Noch_63001

Noch

Finally also in N: Amtzell breakpoint

The breakpoint is very detailed and realistically recreated. Travelers are waiting for the incoming train to start their journey to visit loved ones, for a business meeting or a trip with the family. Great scenes, which are individually recreated here with the "Amtzell" stop and still look very realistic.

In addition to the reception building, a small luggage and goods shed and a covered outdoor waiting area are also shown on the model.
As is usual with many small breakpoints, the Amtzell breakpoint can also be used freely, e.g. B. stand on a gravel surface.
Therefore, no platform is included in the kit. If you still want to represent one, we recommend the NOCH Universal Platform.

The kit is partially hand-colored. Assembly instructions and the appropriate special adhesive are included in the kit.

The Amtzell breakpoint is already available in the NOCH range in H0 gauge and is now being expanded to include the N gauge version. This means that in future the train will also be able to stop at small N-gauge villages and towns. Note: gutters are not included in the kit.

81.99 EUR^*

Art.-no. Noch_63906

Noch

The Church Bells Ring among the Stars![nbsp]
The lovely church of »St. George« is characterized by the harmonious architecture, the beautiful half-timber structure and charming details.[nbsp]
The model is consciously kept small, to allow the church to be installed within a village or as an individual building in a rural area.[nbsp]
The bell ringing is saved on an electronic chip. The complete sound electronics including the loudspeaker and LEDs are assembled ready-to-connect. The connection is made via a usual 16 V transformer, suitable for AC/DC.

The Laser-Cut Kit includes a detailed construction manual and a suitable special Laser-Cut adhesive.

13.50 EUR^*

Art.-no. N-Train_211066

N-Train

- Made from photo-etched brass
- Assembled and painted
- Includes 3 benches

16.50 EUR^*

Art.-no. N-Train_211079

N-Train

3 containers

16.50 EUR^*

Art.-no. N-Train_211080

N-Train

3 containers

31.95 EUR (RRP*)

28.76 EUR^*

Art.-no. Preiser_79006

Preiser

31.95 EUR (RRP*)

28.76 EUR^*

Art.-no. Preiser_79008

Preiser

unpainted figures, kit, material color white

13.90 EUR (RRP*)

12.51 EUR^*

Art.-no. Preiser_79045

Preiser

Set of 6 carefully hand-painted plastic Franciscan monks.

15.20 EUR (RRP*)

13.68 EUR^*

Art.-no. Preiser_79209

Preiser

35.20 EUR (RRP*)

31.68 EUR^*

Art.-no. Preiser_79502

Preiser

35.20 EUR (RRP*)

31.68 EUR^*

Art.-no. Preiser_79506

Preiser

Finished model made of plastic

9.99 EUR^*

Art.-no. MU_N-H00301

Modellbahn Union

Quad garage for backyards, doors can be displayed open. Extensive fine laser-cut details of the wood surface.

Old MKB number 160307