N-Scale 06/2025: Bargains, Woodland

499.00 EUR (RRP*)

399.99 EUR^*

Art.-no. Minitrix_16032

Minitrix

Prototype: German Federal Railroad (DB) steam locomotive 03 263 with Wagner smoke deflectors. Operating condition around 1952. "Film star" from the Bundesbahn film "Little Man on a Big Journey".

Highlights:
- 5 Preiser figures included
- Engine lighting
- Cab lighting
- Digital sound with many functions

Model: Chassis of locomotive and tender as well as tender body made of die-cast metal. Built-in digital decoder and noise generator with mfx and DCC formats. Locomotive and tender closely coupled. Drive in the tender, 3 axles powered, traction tires. Firebox flickering using processor-controlled light-emitting diodes (red-orange). 2-light headlights, driver's cab lighting and engine lighting made of warm white LED. Analog headlights that change depending on the direction of travel. Coupling mount according to NEM at the end of the tender. New smoke chamber door without central locking, with lower license plate.
Length over buffers 150 mm.

Retrofit kits for shunting steps, rail clearers and coupling at the front with holder, as well as 5 Preiser figures (Peter, dog Schwups, stoker, train and locomotive driver), included.

You can get a complete train with the item numbers 18286, 18287, 18486 and 18487.

429.00 EUR (RRP*)

349.99 EUR^*

Art.-no. Minitrix_16345

Minitrix

For the InterCity traffic (IC 71) planned from 1971, series production of the 103 series began in 1969, but with new specifications: the trailer loads of TEE and IC trains at 200 km/h increased from 300 to 480 t and 800 t heavy express trains should still be able to be transported at 160 km/h. For the 145 series locomotives - now referred to as the 103.1 series - this led to a whopping increase in output of 25.3% compared to the prototypes - a total of an impressive 7,440 kW or 10,116 hp. After their delivery between 1970 and 1974, the 103.1 immediately took over the new IC trains and of course the prestigious TEE, some of which had now even been integrated into the new IC network. Only after more than thirty years of use in heavy, high-quality passenger train service with maximum mileage did the series locomotives perform their last scheduled service in December 2002.

Prototype: German Federal Railroad (DB) electric locomotive 103 237-4 as it looked around 1985. Basic paint scheme in crimson red/ivory. Wheel arrangement Co'Co', built from 1970.

Highlights:
- Technology variant
- Housing made of metal-filled plastic
- Digitally raised and lowered roof pantographs
- Digital sound with many functions
- Lighting with warm white LED

Model: Housing made of metal-filled plastic for improved traction. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Roof pantograph can be raised and lowered digitally. Head and tail signals that change with the direction of travel, with warm white LEDs, driver's cab lighting, engine room lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars.
Analog headlights that change depending on the direction of travel.
Anniversary logo “150 Years of German Railways” included as a slide-in image.
Length over buffers 126 mm.

The 103 237-4 electric locomotive is an ideal match for the special TT on page 20.

One-off series.

329.00 EUR (RRP*)

249.99 EUR^*

Art.-no. Minitrix_16433

Minitrix

Prototype: German State Railroad electric locomotive 243 357-1. Wheel arrangement Bo'Bo', built from 1984. Operating condition around 1990. Use: freight and passenger trains.

Highlights:
- New design
- Lots of sound features
- Lighting with warm white LEDs
- Cab lighting
- Headlights can be switched off

Model: Housing and carrier made of die-cast zinc. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Analog headlights that change depending on the direction of travel. Attached handlebars. Length over buffers 104 mm.

You can find spare parts for our items here in our spare parts search.

489.00 EUR (RRP*)

339.99 EUR^*

Art.-no. Minitrix_16442

Minitrix

Prototype: French State Railways (SNCF) class 150 X (type 1´E h3) steam locomotive with a tender. The locomotive looks as it did around 1950. Use: Heavy freight trains.

Highlights:
- Metal finish
- Bell-shaped armature motor with flywheel
- Steam train sound
- Engine lighting
- Firebox flicker

Model: The locomotive and tender are diecast metal. Bell-shaped armature motor with flywheel built into the boiler. 5 axles powered by coupling rods, traction tires. Built-in mfx DCC digital decoder and sound generator. The locomotive and tender are closely coupled. 2-light headlights, engine and driver's cab lighting made of warm white LEDs. Firebox flickering by means of processor-controlled light-emitting diodes (red-orange). 2-light front signal analog in operation. NEM coupler pocket at the end of the tender. to open the smokebox door.
Length over the buffers 141 mm.

319.00 EUR (RRP*)

239.99 EUR^*

Art.-no. Minitrix_16693

Minitrix

Prototype: French State Railways (SNCF) express train electric locomotive BB 9231 in the special Arzens livery. Operating condition around 1985. Year of construction from 1957.

Highlight: Digital sound with many functions

Model: shape variant. Built-in digital decoder and noise generator for operation with mfx and DCC. Motor with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, with warm white light-emitting diodes, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. Attached handlebars. Analog headlights that change depending on the direction of travel. Length over buffer 101 mm.

185.00 EUR (RRP*)

129.99 EUR^*

Art.-no. Minitrix_18275

Minitrix

Prototype: 3 different express train cars of different designs, in the design of the German Federal Railroad (DB), for the long-distance express train FD 1922 Berchtesgadener Land from Freilassing via Munich, Ingolstadt, Würzburg, Cologne to Dortmund. 1 type Dms 905.1 baggage car, 1 type Bm 234 compartment car and 1 type Avmz 111.0 compartment car. Operating condition in 1989.
Model: All cars with kinematics for close coupling. The 2nd class compartment car Bm 234 with an LED end-of-train signal that can be switched off. Prepared for the subsequent installation of interior lighting. Total length over buffers 495 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a prototypical train with the class 110 locomotive item number 16109 and with the express train car sets 18274 and 18276.

119.00 EUR (RRP*)

99.99 EUR^*

Art.-no. Minitrix_18276

Minitrix

Prototype: 2 express train cars type Bm 234, in the German Federal Railroad (DB) version, for the long-distance express train FD 1922 Berchtesgadener Land from Freilassing via Munich, Ingolstadt, Würzburg, Cologne to Dortmund. Operating condition in 1989.
Model: All cars have close coupling kinematics. Prepared for the subsequent installation of interior lighting. Total length over buffers 330 mm.

The matching interior lighting: 66616 LED interior lighting.

You can get a prototypical train with the class 110 locomotive, item number 16109, and with the express train car sets 18274 and 18275.

119.00 EUR (RRP*)

69.99 EUR^*

Art.-no. Minitrix_18462

Minitrix

Prototype: Deutsche Bahn AG (DB AG) type Bnrbdzf 480.1 commuter control car in traffic red livery. Use: Regional train and regional express trains around 2018.

Highlights: NEW DESIGN

Model: With kinematics for close coupling, with 3-light headlight on the driver's cab side with light change 3x white and 2x red, with 14-pin digital interface and with illuminated train destination display. Prepared for the subsequent installation of interior lighting. Authentic coloring and lettering. Length over buffers 165 mm.

The matching interior lighting: 66611 LED interior lighting.

49.99 EUR^*

Art.-no. Minitrix_Fahrregler

Minitrix

- Speed controller 190956, AC output for switch drives max 24 Volt, adjustable DC output 0-14 Volt max 1.0 A
- Connection cable with connection terminal for Minitrix tracks ready soldered
- Switching power supply 18 V, 18 W

119.99 EUR (RRP*)

89.99 EUR^*

Art.-no. MU_N-T27015

Modellbahn Union

The Modellbahn Union Spur N models of the railbus are based on the well-known model from Brekina. Compared to the Brekina model, the Modellbahn Union models have been adapted to the current state of the art and optimized with the current possibilities. The models received the current Next18 interface, loudspeakers and a new drive with a new, smooth-running high-performance motor. The models are analog, DCC/SX Digital with and without sound available. We install an ESU LokSound 5 decoder with impressive original driving sounds in the sound models. In connection with the decoder, the large hidden speaker produces an impressive sound for N gauge models. To optimize the digital driving characteristics and the sound functions, a buffer memory with a capacitor capacity of 400 µF is installed in the sound version of the model. The model is the MAN version with two engines. The sound version of the model is of course equipped with the correct twin-engine ESU sound.

Prototype: The rail bus was built by MAN between 1956 and 1969 and delivered to various private railways. It was available in one- and two-engine versions with MAN diesel engines from its own production. Depending on the version, the railbuses had 66-70 seats and an engine power of 150-200 hp. The vehicles were used individually or in double and triple traction. Some companies also used the model to pull freight cars. A total of 60 vehicles were built. Multiple changes of ownership resulted in a large number of color and paint variants. The area of application extended across Germany, currently there are still several rail buses in regular museum use.

The models have a 5-pole motor, white-red light change (individually switchable in digital operation), a Next18 digital interface, prototypical inscriptions, NEM coupler pockets and standard N couplers. The models appear in an edition of only 250 copies each. The LüP is 10.2 cm per vehicle.

13.50 EUR^*

Art.-no. N-Train_211127

N-Train

- 3D printed with high-quality material
- Painted product
- Contains 18 fruit crates in different sizes

365.00 EUR (RRP*)

199.99 EUR^*

Art.-no. Piko_40351

Piko

The model of the legendary BR E16 electric locomotive impresses with its harmonious paintwork and printing, as well as precise housing engravings and exact detailed representations of the distinctive Buchli drives. In addition, the PIKO BR 116 has fine spoked wheel sets, which, together with the delicate roof equipment, the pantographs and the extra grab bars, contribute to an authentic overall impression of the model. The locomotive has excellent running characteristics and high tractive forces for true-to-original train compositions. The model is equipped with a modern Next18 interface and shows the usual red/white light change. The PIKO model corresponds exactly to its original in terms of shape, color and printing. With the factory-integrated sound decoder, which handles the data formats DCC with RailComPlus®, Motorola®, Selectrix® and M4, the BR 116 electric locomotive has once again achieved an outstanding implementation as a sound locomotive. The powerful loudspeaker is tailored to the BR 116 and enables a powerful sound. Many locomotive-typical sounds and functions can be called up individually. Sound is also possible in analogue mode - only driving noise.

310.00 EUR (RRP*)

199.99 EUR^*

Art.-no. Piko_40540

Piko

New for 2022: PIKO captured the E91 perfectly and transferred it to a scale of 1:160. The new development is characterized by the constructive symbiosis of excellent model implementation and excellent driving characteristics. The sharp engravings of the housing, paired with a very fine printing and garnished with extremely filigree pantographs make the locomotive a gem. Of course, the model has a light change in LED technology with red tail lights. Additional lighting functions can be switched on by retrofitting a digital decoder, for which a Next18 interface is available for easy installation.

435.00 EUR (RRP*)

239.99 EUR^*

Art.-no. Piko_40541

Piko

New for 2022: PIKO captured the E91 perfectly and transferred it to a scale of 1:160. The new development is characterized by the constructive symbiosis of excellent model implementation and excellent driving characteristics. The sharp engravings of the housing, paired with a very fine printing and garnished with extremely filigree pantographs make the locomotive a gem. Of course, the model has a light change in LED technology with red tail lights. Additional lighting functions can be controlled using a digital decoder. In the sound version, the BR 191 has a PSD XP 5.1 S SoundDecoder of the latest generation ex works and has PIKO TrainSound® onboard.

320.00 EUR (RRP*)

179.99 EUR^*

Art.-no. Piko_40561

Piko

New for 2022: When implementing the 101 series on a scale of 1:160, PIKO hit the external design of the three-phase locomotive perfectly. Details such as the DSA 350 single-arm pantograph were delicately reproduced. The sharply engraved bogies behind the low aprons round off the visual impression of the locomotive perfectly. A powerful mid-engine provides propulsion in the model. Two brass centrifugal masses on the motor shaft ensure excellent synchronization. The locomotive also has two diagonally arranged wheels with traction tires for good traction. In addition to the headlights using LED technology, the model also has driver's cab lighting. In the sound version, the BR 191 has a PSD XP 5.1 S SoundDecoder of the latest generation ex works and has PIKO TrainSound® onboard.

179.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Hobbytrain_H30174

Hobbytrain

With the "Goods Belong on the Rails" initiative, DB Cargo is shifting more transport from road to climate-friendly rail. The multi-system Vectron with the operating number 193 560 travels daily on the European rail network as a rolling billboard for this campaign.

Company number: 193 560
Approval for D, AT, B, NL, SK, PL, CZ, H, HR
Operating status 2023

Model features:
– Current consumption across all axes
– Interface NEM 662 (Next 18)
– Alternating light white/red, switchable
– Consideration of all design differences in detail
– prepared for sound
– Length over head: 119 mm
– recommended for radius 2228 mm

274.90 EUR (RRP*)

179.99 EUR^*

Art.-no. Hobbytrain_H30174S

Hobbytrain

With the "Goods Belong on the Rails" initiative, DB Cargo is shifting more transport from road to climate-friendly rail. The multi-system Vectron with the operating number 193 560 travels daily on the European rail network as a rolling billboard for this campaign.

Company number: 193 560
Approval for D, AT, B, NL, SK, PL, CZ, H, HR
Operating status 2023

Model features:
– Current consumption across all axes
– Interface NEM 662 (Next 18)
– Alternating light white/red, switchable
– Consideration of all design differences in detail
– factory fitted with sound decoder
– Length over head: 119 mm
– recommended for radius 2228 mm

169.90 EUR (RRP*)

119.99 EUR^*

Art.-no. Hobbytrain_H3115

Hobbytrain

Although the Vectron DE is far from reaching the number of units of the E-Vectron, the locomotives are still very popular with customers who have special requirements for a modern Siesel locomotive. The two operators Bahnbau Wels / Rhomberg-Sersa and EGP are currently on the road with the Vectron DE in eye-catching stickers.

Model Features:
– Power consumption over all axes
– 2 traction tires
– Interface NEM 662 / Next 18
– Alternating light white/red, can be switched off
– prepared for sound
– etched side and roof grilles
- LÜP 124.3 mm

349.99 EUR^*

Art.-no. Diverse_IH-T017

Diverse

14-car Spanish high-speed train AVE AVLO

45.90 EUR (RRP*)

29.99 EUR^*

Art.-no. MFTrain_MF33298

MFTrain

New shape. In 1971/1972, the Deutsche Reichsbahn put 37 car transport cars for passenger trains of the DDm type into operation from the French company ANF. With reunification, the cars became part of Deutsche Bahn AG, where they were listed as DDm 916. They were used in the motorail trains together with the DDm 915. Many cars were later sold abroad or to private companies. In addition to the German vehicles, there are also French, Spanish, Dutch and Czech variants.

45.90 EUR (RRP*)

29.99 EUR^*

Art.-no. MFTrain_MF33307

MFTrain

New shape. In 1971/1972, the Deutsche Reichsbahn put 37 car transport cars for passenger trains of the DDm type into operation from the French company ANF. With reunification, the cars became part of Deutsche Bahn AG, where they were listed as DDm 916. They were used in the motorail trains together with the DDm 915. Many cars were later sold abroad or to private companies. In addition to the German vehicles, there are also French, Spanish, Dutch and Czech variants.

45.90 EUR (RRP*)

29.99 EUR^*

Art.-no. MFTrain_MF33308

MFTrain

New shape. In 1971/1972, the Deutsche Reichsbahn put 37 car transport cars for passenger trains of the DDm type into operation from the French company ANF. With reunification, the cars became part of Deutsche Bahn AG, where they were listed as DDm 916. They were used in the motorail trains together with the DDm 915. Many cars were later sold abroad or to private companies. In addition to the German vehicles, there are also French, Spanish, Dutch and Czech variants.

45.90 EUR (RRP*)

29.99 EUR^*

Art.-no. MFTrain_MF33312

MFTrain

New shape. In 1971/1972, the Deutsche Reichsbahn put 37 car transport cars for passenger trains of the DDm type into operation from the French company ANF. With reunification, the cars became part of Deutsche Bahn AG, where they were listed as DDm 916. They were used in the motorail trains together with the DDm 915. Many cars were later sold abroad or to private companies. In addition to the German vehicles, there are also French, Spanish, Dutch and Czech variants.

131.91 EUR^*

Art.-no. Jaegerndorfer_JC60000-3

Jägerndorfer

The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.

Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
– Exclusively for Lemke Collection

119.90 EUR (RRP*)

69.99 EUR^*

Art.-no. Jaegerndorfer_JC60290

Jägerndorfer

2 parts Set of domestic passenger carriages

City Shuttle design with ÖBB Pflatsch

Length over buffer: 290 mm

Minimum passable radius: 225 mm

207.90 EUR (RRP*)

149.99 EUR^*

Art.-no. Jaegerndorfer_JC60390

Jägerndorfer

3-piece push-pull train set without motor

City Shuttle Design with ÖBB Pflatsch

6-pin decoder interface

length over buffers: 495 mm

minimum drivable radius: 225 mm

449.90 EUR (RRP*)

249.99 EUR^*

Art.-no. Jaegerndorfer_JC75410

Jägerndorfer

- 4-window front with low roof
- Train with 1 power car, 2 intermediate cars and 1 control car
- Model with changing lights
- Control car with 6-pin interface, railcar with Next 18 interface

The 5045 and 5145 series of the Austrian Federal Railways are express train diesel multiple units built in the 1950s and known as the Blauer Blitz. The vehicles were initially used primarily in international and national express train traffic; the express railcar train (TS) "Miramare" was in use between Vienna and Trieste. For many years they also ran domestic express connections between Vienna and Villach and between Vienna and Graz via the Southern Railway. Several vehicles have been preserved as museum pieces. They are owned by AUSTROVAPOR, are looked after by the “Club Blauer Blitz” in the Strasshof Railway Museum and could be chartered in any combination for special trips until 2009. Since 2016, a two-part railcar train has been available again for nostalgic trips after partial repairs.

23.95 EUR (RRP*)

11.99 EUR^*

Art.-no. Lemke_LC4414

Lemke

The Mercedes-Benz O 302 is a bus model from Daimler-Benz AG that was introduced in 1965. The O 302 was designed as a high-floor solo bus for city, intercity and long-distance travel. More than 32,000 examples of the O 302 were built up to 1976. Starting in 1969, Daimler-Benz built the OE 302, an electric bus, based on the O 302. Some third-party manufacturers also built vehicles based on the O 302. The O 302 was manufactured under license by Biamax, and from 1976 with the rear end and grille of the O 303. In 1974, an O 302 served as a team bus for the German national soccer team. (Source: Wikipedia)

32.90 EUR (RRP*)

16.99 EUR^*

Art.-no. Lemke_LC4487

Lemke

The S 431 DT is a Setra double-decker touring coach that has been manufactured by Evobus since 2002. It is the only double-decker model in the Rheie TopClass 400. In 2013 there was a facelift in which the vehicle was technically revised and a Euro 6 engine was introduced. A new cockpit was also introduced. By June 2015, Daimler had delivered a total of 2,500 vehicles. The vehicle was built at the Setra plant in Neu-Ulm a Setra S431 DT costs around 470,000 euros, depending on equipment.

The S431 DT also gained importance in particular due to the rapidly growing long-distance bus business.

Length: 89.6mm

229.90 EUR (RRP*)

149.99 EUR^*

Art.-no. Lemke_LC96004

Lemke

Set consisting of an electric locomotive series 192 Smartron (hobby train) and 2 container wagons type Sgnss (MFTrain) of the EVB for Ep.VI.

Since it was presented at Innotrans 2010, the Vectron from Siemens has developed into a real bestseller - over 750 machines to over 30 different customers in more than 17 countries and there is still a long way to go. New variants are added almost every day – driving across Europe. Thanks to its multi-system capability, the Vectron is the ideal locomotive for use on Europe's tracks. SBB Cargo machines drive from Switzerland to the Netherlands or TXL Vectron from northern Germany to Italy. The Vectron is now also at home in Eastern Europe and the Balkans. From 2018, Siemens will be offering the Smartron for Germany, a preconfigured locomotive that is currently only available in Capri blue. The Smartron is particularly interesting for smaller EVU operating within Germany and enables customers to operate cost-effectively with a high level of operational reliability.

Model properties electric locomotive:
– Power consumption over all axes
– Interface NEM 662 (Next 18)
– Alternating light white/red, can be switched off
– Consideration of all design differences in detail
– prepared for sound
- Length over buffer: 119 mm

36.90 EUR^*

Art.-no. Mafen_415124

Mafen

ÖBB signal

- Exact scale (1:160)

- "Fine Scale" product

- SMD LEDs

- Made with photo-etched brass and 3D printing.
- Handcrafted and painted

- Resistors included for 16 V (DC)

149.00 EUR (RRP*)

99.99 EUR^*

Art.-no. Revell_39195

Revell

Revell Airbrush Basic Set 2023: Perfect introduction to the airbrush world for breathtaking models
Discover the Airbrush Basic Set with Compressor Version 2023 from Revell - your gateway to the fascinating world of airbrush technology. This comprehensive set is ideal for beginners and advanced model makers who want to refine their projects with professional airbrush techniques. At the heart of it is a modern mini compressor in the unmistakable Revell design, which not only offers a constant source of compressed air, but also has three adjustable speeds. This enables precise control over the air supply, ideal for a wide range of applications.

A high-quality metal spray gun perfectly complements the set and enables effortless airbrushing thanks to its single-action system: simply regulate the amount of paint while the compressor controls the air supply. The newly designed compressed air hose with screw thread offers a safe and stable connection to the spray gun - a significant improvement over the previous plug-in connections.

Scope of delivery in detail:
- Mini compressor in stylish Revell design with 3 adjustable speeds
- High-quality metal spray gun for precise airbrushing
- 25 ml Aqua Color Clean for cleaning the spray gun
- 25 ml Aqua Color Mix to optimally dilute the colors
- 2 x 18 ml Aqua Color paints for immediate start
- 2 mixing cups with lids for color mixing
- 2 pipettes for precise color dosing
- Compressed air hose with new screw thread for a secure connection
- A detailed user manual that will help you get started step by step

In addition to the extensive accessories, the set is packed in a practical transport case. This case not only offers easy storage, but also makes the set mobile and therefore ideal for use in different locations. With the Revell Airbrush Basic Set 2023 you are well equipped to bring your model creations to life with impressive color effects.

Warning:
- GHS 02, GHS 07, Warning Contains 1-methoxy-2-propanol (Revell Aqua Color Clean), ethanol (Aqua Color Mix)
- Aqua Color Clean: May cause drowsiness and dizziness
- Keep out of reach of children. Store locked up. "Dispose of contents/container in accordance with local/regional/national/international regulations."

6.90 EUR^*

Art.-no. Rietze_16400

Rietze

New shape in 3D printing

14.99 EUR^*

Art.-no. Tomix_6423

Tomix

3 inserts with grinding and 3 with polishing function, as well as brush and sponge for use with the Tomix cleaning trolley 6421, 6422, 6425, 6426 etc..

Suitable for all cleaning trolleys from the Tomix range.

5.99 EUR^*

Art.-no. Tomix_6424

Tomix

30 replacement pads for the TOMIX cleaning trolley 6421, 6422, 6425, 6426

74.79 EUR (RRP*)

59.99 EUR^*

Art.-no. Tomix_6425

Tomix

rail vacuum cleaner

The classic in a new design! Immediately available, permanently reduced in price!

The rail cleaning trolley can be used for cleaning, as a vacuum cleaner or as a grinding trolley. 3 grinding and cleaning pads are included in the packaging. This wagon is absolutely indispensable and saves tiresome rail cleaning work, can also be used in places that are difficult to access. We directly recommend the use of 2 trolleys. You can have one permanently polished and use the other directly behind it as a vacuum cleaner.

Functionality:
It is operated using 12V DC voltage and being pulled or pushed by a motorized vehicle. The analogue version is not suitable for digital model railways, as the permanently applied current overloads the motor and triggers the heat protection switch.

You can purchase the car directly from us in the digital version. We convert the car with a Doehler and Haass decoder which we solder.

Cart Length: 120mm

199.99 EUR (RRP*)

119.99 EUR^*

Art.-no. Tomytec_327721

Tomytec

2-part Tatra tram with very easy to assemble TM-TR01 drive to motorize the model. The model can also be ordered digitally from us. The Tomytec importer Faller has the set under number 977821. Type T4 railcar and B4 trailer, here in the colors of the Leipzig transport company.

Leipzig, the largest city in the Free State of Saxony in East Germany, has a route network of around 146 kilometers.

Tatra tram type T4-B4 Prototype information: The past of the Tatra tram goes back to the GDR era. The previous versions were designed by the Czechoslovakian manufacturer CKD Tatra in what was then the GDR, tested in Prague and then used in the major cities of Dresden, Leipzig, Halle and Magdeburg. After reunification, these trams were even used abroad such as North Korea, Romania and Russia. A total of 2,635 T4 vehicles were built between 1968 and 1987. The majority of production took place in Dresden and Leipzig.
The Leipzig transport company had been using the Tatra tram for a long time. As an exhibitor at the Modell Hobby Spiel in Leipzig, we were able to personally enjoy these trips. A striking design that still exists on modern trams today. The railcars are currently still in use and support regular rail traffic. In the future, the existing Tatra trams will remain in stock as a reserve. However, since there is no end to the use of this tram in sight, you can continue to enjoy this special tram model as a passenger.

30.75 EUR (RRP*)

27.68 EUR^*

Art.-no. Bachmann_76094

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

Features include:
- Realistic painted body with precise graphics
- Factory-installed Rapido-style couplings
- Compatible with all common brands of N scale tracks
- Wheels made entirely of metal
- Runs on Bachmann EZ Track® in N scale
- The perfect addition to your Thomas and Friends collection
- Detailed character face

30.75 EUR (RRP*)

27.68 EUR^*

Art.-no. Bachmann_76095

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

Features include:
- Realistic painted body with precise graphics
- Factory-installed Rapido-style couplings
- Compatible with all common brands of N scale tracks
- Wheels made entirely of metal
- Runs on Bachmann EZ Track® in N scale
- The perfect addition to your Thomas and Friends collection
- Detailed character face

38.75 EUR (RRP*)

34.88 EUR^*

Art.-no. Bachmann_77093

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

Tankers, also called wagons, are round, cylindrical vehicles used to transport liquids and other goods. These tankers are based on the pre-war 14-ton standard tankers commonly used in most regions.

- Compatible with N-gauge tracks and model railways
- The perfect addition to your Thomas & Friends™ collection
- Recommended for children 14 years and older

38.75 EUR (RRP*)

34.88 EUR^*

Art.-no. Bachmann_77094

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

Tankers, also called wagons, are round, cylindrical vehicles used to transport liquids and other goods. These tankers are based on the pre-war 14-ton standard tankers commonly used in most regions.

- Compatible with N-gauge tracks and model railways
- Recommended for children 14 years and older

38.75 EUR (RRP*)

34.88 EUR^*

Art.-no. Bachmann_77095

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

Tankers, also called wagons, are round, cylindrical vehicles used to transport liquids and other goods. These tankers are based on the pre-war 14-ton standard tankers commonly used in most regions.

- Compatible with N-gauge tracks and model railways
- Recommended for children 14 years and older

27.75 EUR (RRP*)

24.98 EUR^*

Art.-no. Bachmann_77097

Bachmann

Bachmann carefully reproduces your favorite Thomas & Friends™ characters in N scale. All vehicles feature realistic character faces (where applicable), detailed plastic bodies, solid metal wheels, and Rapido couplings.
Build your Thomas & Friends™ collection with each friend!

The Troublesome Trucks are the rogues of Sir Topham Hatt's railway who delight in causing trouble for any engine they pull. They are loud and silly, talk a lot, and are inattentive. The Troublesome Trucks are freight cars and can therefore be used anywhere on the island. However, they especially enjoy causing trouble in the coal mines and quarries.

- Compatible with N-gauge tracks and model railways
- The perfect addition to your Thomas & Friends™ collection
- Recommended for children 14 years and older

13.95 EUR^*

Art.-no. Woodland_WA2152

Woodland Scenics

A set of six people and a goose. A little girl is teasing the goose, a boy is pulling back his slingshot, a woman is hoeing the garden, a man is carrying a feed sack on his shoulders and another is carrying a basket of vegetables.

Set contains 7 pieces. Colors may vary from actual product.

13.95 EUR^*

Art.-no. Woodland_WA2157

Woodland Scenics

A set of men, with protective welding helmets and gloves, working with an assortment of mig and spot welders, a plasma cutter and gas cylinders - complete with angle iron pieces.

Set contains 13 pieces. Colors may vary from actual product.

13.95 EUR^*

Art.-no. Woodland_WA2199

Woodland Scenics

All these campers need in the great out-of-doors is their tent, a good roaring campfire and spooky ghost stories.

Set contains 8 pieces. Colors may vary from actual product.

14.95 EUR^*

Art.-no. Woodland_WA2206

Woodland Scenics

A set of three benches and six people.

Set contains 3 pieces. Colors may vary from actual product.

14.95 EUR^*

Art.-no. Woodland_WST1406

Woodland Scenics

Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.

All risers are a patented product

4 pieces with the dimensions: 1.27 cm x 6.35 cm x 60.9 cm

18.95 EUR^*

Art.-no. Woodland_WST1407

Woodland Scenics

Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.

All risers are a patented product

4 pieces with the dimensions: 2.54 cm x 6.35 cm x 60.9 cm

19.95 EUR^*

Art.-no. Woodland_WST1408

Woodland Scenics

Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.

All risers are a patented product

4 pieces with the dimensions: 5.08 cm x 6.35 cm x 60.9 cm

19.95 EUR^*

Art.-no. Woodland_WST1409

Woodland Scenics

Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.

All risers are a patented product

2 pieces with the dimensions: 10.2 cm x 6.35 cm x 60.9 cm

32.95 EUR^*

Art.-no. Woodland_WST1410

Woodland Scenics

Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.

The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.

NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.

To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.

8 sections rise / fall 10.1 cm in a 4.87 m run

Each section measures 6.35 x 24 inches

24.95 EUR^*

Art.-no. Woodland_WST1411

Woodland Scenics

Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.

The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.

NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.

To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.

4 sections raise / lower 10.1 cm in a 2.43 m run

Each section measures 6.35 x 24 inches

14.95 EUR^*

Art.-no. Woodland_WST1412

Woodland Scenics

Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.

To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.

8 pieces per pack - each piece rises from 0-1.27 cm) within 60.96 cm and measures 6.35 cm x 60.9 cm.

14.95 EUR^*

Art.-no. Woodland_WST1413

Woodland Scenics

Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.

To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.

4 pieces per pack - each piece lifts from 0 - 2.54 cm within 60.96 cm and measures 6.35 cm (W) x 60.9 cm (L).

16.95 EUR^*

Art.-no. Woodland_WST1414

Woodland Scenics

Risers are typically used with slope / slope starters to create different slopes on your facility. Risers bend easily to form curves and work on plywood or foam backing. For installation, they are nailed in place with foam nails and secured with Foam Tack ™ glue or a low temperature foam glue gun and glue sticks.

All risers are a patented product

4 pieces with the dimensions: 1.9 cm x 6.35 cm x 60.9 cm

14.95 EUR^*

Art.-no. Woodland_WST1415

Woodland Scenics

Incline starters are high density foam wedges that are used to start your ride on an up or down slope. Each piece in a package raises / lowers the rail a certain number of centimeters within a 24-inch distance, allowing for a smooth transition from one height to another.

To install, pin in place with foam nails and secure with Foam Tack ™ glue or the low temperature foam glue gun and glue sticks. Use alone or with risers.

6 pieces per pack - each piece rises from 0 - 1.9 cm within 60.96 cm and measures 6.35 cm x 60.9 cm.

32.95 EUR^*

Art.-no. Woodland_WST1416

Woodland Scenics

Slope / Lowering sets are the ideal way to change the height of your route quickly and easily. Each set contains the high density foam pieces necessary to raise or lower the height of your track.
Incline / decline sets are available with either a 2%, 3% or 4% incline.

The sets can begin an incline at 0 "and reach a maximum height of 4 1/2" (11.4 cm). Slopes can start at a maximum height of 4 1/2 "(11.4 cm) and descend to 0". The actual dimensions depend on the variety used.

NOTE: A kit contains only the foam pieces required to either create a slope OR a slope. A set cannot do both. You need two sets to create both a slope and a slope on your system.

To attach the slope / slope kits, secure them with foam nails and Foam Tack ™ glue or the low temperature foam glue gun and glue sticks.

6 sections raise / lower 11.4 cm in one 3.65 m run

Each section measures 6.35 x 24 inches.

13.95 EUR^*

Art.-no. Woodland_WST1460

Woodland Scenics

The panels are ideal for track systems and sidings. They can be combined well with cork or Homasote® *. Track-Bed dampens sound, does not have to be soaked like cork, remains flexible and does not dry out or become brittle.

Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).

6 sheets / pack - 3mm x 8.25cm x 60.9cm

28.95 EUR^*

Art.-no. Woodland_WST1462

Woodland Scenics

Strips are the perfect underlay for narrow track applications. They can be combined well with cork or Homasote® *. Track-Bed dampens noise, does not need to be pre-watered like cork, remains flexible and does not dry out or become brittle. Also suitable for HOn3 and HOn30 gauges.

Save compared to buying individually.

Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).

36 strips / pack - 3mm x 3.17cm x 60.9cm

* Homasote® is a registered trademark of the Homasote Company.

13.95 EUR^*

Art.-no. Woodland_WST1472

Woodland Scenics

Strips are the perfect underlay for narrow track applications. They can be combined well with cork or Homasote® *. Track-Bed dampens noise, does not need to be pre-watered like cork, remains flexible and does not dry out or become brittle. Also suitable for HOn3 and HOn30 gauges.

Save compared to buying individually.

Easy assembly with Foam Tack ™ adhesive (ST1444). Fastened with foam nails (ST1432).

12 strips / pack - 3mm x 3.17cm x 60.9cm

* Homasote® is a registered trademark of the Homasote Company.

13.95 EUR^*

Art.-no. Woodland_WST1475

Woodland Scenics

Track-Bed Roll offers a smooth application. It dampens sound, does not have to be pre-watered like cork, remains flexible and does not dry out or become brittle. Combines well with cork or Homasote® * applications. Also ideal for H0n3 and Hon30 gauges.

Easy assembly with Foam Tack ™ adhesive (ST1444). Fasten with foam nails (ST1432).

1 roll / pack - 3mm x 3.17cm x 7.31m

* Homasote® is a registered trademark of the Homasote Company.

39.00 EUR (RRP*)

10.99 EUR^*

Art.-no. Woodland_WST1478

Woodland Scenics

Super Sheets are the perfect base for multi-track stations, switches, loading areas and sidings. They combine well with cork or Homasote. Track-Bed dampens sound, does not need to be soaked like cork, remains flexible and does not dry out or become brittle.

Easy installation with Foam Tack™ Glue (ST1444). Fasten with Foam Nails (ST1432).

3 mm x 30 cm x 60 cm

*Homasote® is a registered trademark of the Homasote Company.