N-Scale 03/2025: Minitrix, Fleischmann, Lemke, Noch, Faller

9.99 EUR^*

Art.-no. DM-Toys_6005

DM-Toys

Our Topseller finally available again with a new extensive print!

True to original reproduction of the construction vehicle of the company Caterpillar in scale N 1: 160.

Detailed model of die-cast metal and plastic
- High quality metal construction
- Many movements possible
- Many operational procedures adjustable

14.99 EUR^*

Art.-no. DM-Toys_6006

DM-Toys

True to the original replica of the construction vehicle from Caterpillar on a scale of N 1: 160.

Detailed model made of die-cast metal and plastic
- high quality metal construction
- numerous movements possible
- Many operational sequences can be reproduced

13.41 EUR^*

Art.-no. Jaegerndorfer_JC3101

Jägerndorfer

Rotating rotor, metal model with attached plastic parts.

“On July 1, 1983, the Christophorus 1 became the first emergency medical helicopter in Austria to enter service and has been flying for your life for over 30 years.” This is what the official website of the ÖAMTC Emergency Call advertises. The Christophorus 1 has been in service in Innsbruck since June 1, 1983, making it the first rescue helicopter stationed in Austria. All kinds of missions have been carried out from Innsbruck for more than 40 years.

56.99 EUR (RRP*)

51.29 EUR^*

Art.-no. Minitrix_15103

Minitrix

Prototype: four-axle container wagon type Sgns of the AAE, leased to Railion Nederland from the company Den Hartogh, registered in the Netherlands. Loaded with two 20-foot tank containers from the DEN HARTOGH forwarding company.

Model: Chassis made of die-cast metal, bogies type Y 25, with kinematics for close coupling, loaded with 3 tank containers. Length over buffers 123 mm.

309.00 EUR (RRP*)

269.99 EUR^*

Art.-no. Minitrix_16823

Minitrix

Prototype: German Railroad, Inc. (DB AG), road number 218 499-2 general-purpose locomotive, DB ZugBus Regionalverkehr Alb-Bodensee GmbH (RAB) Ulm. Diesel-hydraulic locomotive with a roof design to match the MTU 12V 956 TB 11 engine. With parallel exhaust scoops and a Behr V-shaped cooling system.

Highlights:
- Form variant
- Digital sound with many functions

Model: Shape variation, new roof design to correctly represent 218 499-2 with a TB 11 engine and Behr V-shape cooling system. Built-in digital decoder and sound generator for operation with mfx and DCC. Engine with flywheel, 4 axles powered, traction tires. Headlights and taillights that change with the direction of travel, warm white LEDs, driver's cab lighting, can be controlled digitally. Kinematics for close coupling. The headlights change over with the direction of travel and will work in analog operation. Attached handlebars. The logos "3-Löwen-Takt" and "bwegt" are included. Length over buffers 102 mm.

135.00 EUR (RRP*)

121.50 EUR^*

Art.-no. Minitrix_18269

Minitrix

Prototype: Three four-axle German Federal Railroad (DB) type Fad-50 OOtz self-unloading hopper cars. Version with two unloading hatches on each long side and a brakeman's platform at the front. The cars have Minden-Dorstfeld type bogies. Used for transporting moisture-resistant goods, in this case coke. They looked as they did in the 1960s. All cars are loaded with coke.

Model: All cars have different running numbers, a brakeman's platform, and close coupling mechanism. Total length over buffers 213 mm.

42.99 EUR (RRP*)

38.69 EUR^*

Art.-no. Minitrix_18600

Minitrix

Prototype: four-axle, unloaded container wagon type Sgns of the Swiss Federal Railways Cargo division (SBB Cargo). Packaging is prepared for the loading of 2 refrigerated containers from 66583. Operating condition around 2017.

Model: Chassis made of die-cast metal, bogies type Y 25, with kinematics for close coupling. Length over buffers 123 mm.

59.99 EUR (RRP*)

53.99 EUR^*

Art.-no. Minitrix_66583

Minitrix

Model: 6 coop® refrigerated containers with the motifs sunflower, orange, lettuce, gerbera, lemon and strawberry.

234.90 EUR (RRP*)

149.99 EUR^*

Art.-no. Fleischmann_7160022

Fleischmann

Steam locomotive class 98.8 (GtL 4/4) of the Deutsche Bundesbahn.

- Use in front of passenger and light freight trains on branch lines
- Die-cast metal chassis The 98.8 series, the Bavarian GtL 4/4, was first put into service in 1911 by the Royal Bavarian State Railways. With a few changes, it was built until 1927. The locomotives proved to be very good in operation and, with an output of 450 hp, were the most powerful Bavarian local railway locomotives. The small, undemanding machines were in use by the German Federal Railway on many Bavarian local railway lines until 1953.

51.90 EUR (RRP*)

46.71 EUR^*

Art.-no. Fleischmann_6260047

Fleischmann

IC/EC on-board bistro carriage with 1st class seating compartments, type ARkimmbz 288.4, of the Deutsche Bahn.

IC/EC carriages with current lettering

42.90 EUR (RRP*)

29.99 EUR^*

Art.-no. Fleischmann_6260050

Fleischmann

1st/2nd class center entrance carriage, type ABymb 411, of the Deutsche Bundesbahn.

42.90 EUR (RRP*)

38.61 EUR^*

Art.-no. Fleischmann_6260051

Fleischmann

2nd class center entrance carriage, type Bymb 421, of the Deutsche Bundesbahn.

251.91 EUR^*

Art.-no. Hobbytrain_H32101S

Hobbytrain

New design. Since the market launch in 2014, more than 130 DE 18 locomotives have been sold, which today perform reliably in both shunting and mainline operations. At speeds between 17 and 120 km/h, the DE 18 offers a continuous output of 1,800 kW, which makes it the most powerful center-cab locomotive on the European market. Variants with multi-country equipment operate across borders, with the DE 18 currently being able to be equipped with four national train protection systems and ETCS in various expansion stages. The locomotives can be found with German railway companies such as Rheincargo and Railadventure and industrial railways such as BASF, as well as with foreign operators such as CFL, Europorte and SNCF.
After the realization of the Vossloh G1000 BB and the G1700 BB, the latest diesel locomotive DE 18 is now available as a model for the N gauge. Each model comes with a figure of a shunting locomotive driver with remote control for the N gauge. The figure is newly modeled and manufactured exclusively for us by the NOCH company.

MODEL FEATURES:
– detailed design with numerous attached parts
– five-pole bell-armature motor
- equipped with sound ex works
- Current consumption across all axes
- Alternating light white/red can be switched off
- Consideration of significant design differences
- shunting locomotive driver (made by NOCH)

12.55 EUR^*

Art.-no. Lemke_LC3920

Lemke

The VW T2 is the second generation of the VW Transporter, which has been part of the VW model range since 1950. In 1967, the second series replaced the predecessor VW T1 and was built until 1979. The VW T2 was sold more than 2.5 million times during its twelve-year construction period. To this day, the Bulli has cult status and exists in various variants.
Length: 29mm

12.56 EUR^*

Art.-no. Lemke_LC3923

Lemke

The VW T2 is the second generation of the VW Transporter, which has been part of the VW model range since 1950. In 1967, the second series replaced the predecessor VW T1 and was built until 1979. The VW T2 was sold more than 2.5 million times during its twelve-year construction period. To this day, the Bulli has cult status and exists in various variants.
Length: 29mm

11.65 EUR^*

Art.-no. Lemke_LC4357

Lemke

The VW T3 from Volkswagen was the third generation of the VW Transporter. It was produced from 1979 to 1992 and was the last rear-wheel drive van series. After the VW 411/412 from 1968, the T3 was the last new development of a vehicle from Volkswagen with an air-cooled rear engine. Like all VW buses, the third generation also had the type designation Type 2. In addition to the VW T2 Bulli, the VW T3 also had a large fan base. Length: 30mm

16.49 EUR^*

Art.-no. Noch_06800

Noch

...colorful variety! 250 pieces, colors red, blue, yellow, pink, and white
Flowers can be found almost everywhere. For example, roses, tulips, dahlias, daffodils, etc. are deliberately planted in gardens and flowerbeds. But we also find daisies, primroses, cornflowers, lavender, and many other colorful relatives in the wild, along forest edges or roadsides, streams, and ponds.

Our flowers are a wonderful little innovation: A bed of 4 mm green fibers contains several 9 mm colored flocked fibers. This allows you to recreate wonderfully natural-looking flowers in your model. The set contains a total of 250 flowers, each in five different colors.

With the bright colors of this set, you can plant tulips, roses, daffodils, daisies, daffodils, dahlias and much more in the model.

The flowers are removed from the box and fixed to the model landscape with a drop of glue. We recommend using NOCH Landscaping Glue, but hot glue or all-purpose glue are also suitable.

13.99 EUR^*

Art.-no. Noch_21545

Noch

Content:
24 vines, about 1.6 cm high

27.99 EUR^*

Art.-no. Noch_22110

Noch

The Christmas tree is the focus of every Christmas. Whether a small tree in the living room or a large tree in the market square in the middle of the Christmas market: As soon as the lights come on, the Christmas spirit is guaranteed. The Christmas trees are equipped with warm-white LEDs, which radiate pleasantly warm light, similar to a string of lights with light bulbs. By the way, the gauges that we give to the trees are only recommendations. You can also use the small tree for the track 0 or set up the large one in a city square in lane N. Let your imagination run wild!

The connection is made to the luminous flux output of a standard 16 V model railway transformer. Suitable for DC or AC power connection. Alternatively, operation is possible with a 12 V power supply (500 mA, AC / DC).

15.99 EUR^*

Art.-no. Noch_35060

Noch

It is always fascinating that all the goods and products that are transported across the planet arrive at the right place. The warehouse workers play a particularly important role in this, as they transport pallets, barrels, packages and lots of mail from A to B. A warehouse manager is of course very important here, as he shows his colleagues what they should push and pull from where to where.

One of the workers uses a so-called ant and pulls a pallet with catalogs. Next to him, another worker checks the shipping documents. He uses a few packages as a desk. Two other workers talk to each other and point to positions on the shelf to which they want to lift packages and pallets with the yellow pallet truck. The figures are particularly effective in an outdoor warehouse. Or you can put them in a warehouse with the large doors left open so you can look inside.

12.99 EUR^*

Art.-no. Noch_35600

Noch

Without farmers there is no bread,

says a proverb. And to ensure that the field is always well tended, a farmer sharpens his scythe. Next to him, another farmer wipes the sweat from his brow. He had to dig several holes and furrows to plant cuttings and seeds in the soil. A small child accompanies him at work. The farmer's daughter sows by hand. To do this, she distributes the seeds from her basket over the field. The farmer's wife next to her helps her by raking a little soil over the seeds with her rake so that the birds don't steal them straight away. And since the farm is a family business spanning several generations, grandmother is also there. She sits outside the door and knits socks so that no one gets cold feet in winter.

14.99 EUR^*

Art.-no. Noch_36552

Noch

Wheelchair users – Inclusive life for your model world from NOCH
The wheelchair user figure set from NOCH brings variety and reality to your model railway layout. The lovingly designed figures show two wheelchair users and companions who look after them. These miniatures add an important social dimension to your model landscape and are ideal for scenes in parks, train stations or urban areas.

With this set you can create realistic and lively representations of everyday life that provide variety and authenticity in your model world.

11.79 EUR^*

Art.-no. Noch_60158

Noch

Track cleaning has never been easier! The ingenious invention for cleaning model railway tracks are the cleaning gnomes in N gauge (scale 1: 160).

And it's so easy to use:
- The cleaning dwarfs consist of a robust plastic body with a brush-like cleaning surface that effectively removes the dirt on the rails.
- The dwarfs are simply clipped onto the axles of a wagon - and then they clean the rails in normal driving mode in both directions, as it were!
- The cleaning dwarfs in N can be used for two-axle wagons of all brands (axle diameter max. 1.4 mm).
- The cleaning dwarf should only be replaced when the cleaning surface is heavily soiled.

14.99 EUR^*

Art.-no. Faller_155645

Faller

This item contains: 6 figures.

7.99 EUR (RRP*)

7.19 EUR^*

Art.-no. Faller_170777

Faller

For the realistic design of meadows and wild green areas. Particularly well suited for electrostatic grassing with our "Gras-Fix" (Art. 180691).
Fiber height: 6 mm

9.49 EUR^*

Art.-no. Faller_272588

Faller

The two stone tunnel portals are ideal for building a beautiful tunnel scenery and making the model railway layout a little more varied.

This kit contains: 2 individual parts in 1 color. Use FALLER EXPERT plastic glue for crafting.

Dimensions: 195 x 69 x 7 mm (2 x)
Dimension 2: 58 mm

9.99 EUR (RRP*)

8.99 EUR^*

Art.-no. Faller_272636

Faller