Largest N gauge range
All products available
Fast shipping
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 01/2025: Piko, Jägerndorfer, REE bargains
[nbsp]
Dear customer,
Today we present you a variety of bargains!
[nbsp]
199.99 EUR
(RRP*)
119.99 EUR*
Art.-no. Tomytec_327721
Tomytec
2-part Tatra tram with very easy to assemble TM-TR01 drive to motorize the model. The model can also be ordered digitally from us. The Tomytec importer Faller has the set under number 977821. Type T4 railcar and B4 trailer, here in the colors of the Leipzig transport company.
Leipzig, the largest city in the Free State of Saxony in East Germany, has a route network of around 146 kilometers.
Tatra tram type T4-B4 Prototype information: The past of the Tatra tram goes back to the GDR era. The previous versions were designed by the Czechoslovakian manufacturer CKD Tatra in what was then the GDR, tested in Prague and then used in the major cities of Dresden, Leipzig, Halle and Magdeburg. After reunification, these trams were even used abroad such as North Korea, Romania and Russia. A total of 2,635 T4 vehicles were built between 1968 and 1987. The majority of production took place in Dresden and Leipzig.
The Leipzig transport company had been using the Tatra tram for a long time. As an exhibitor at the Modell Hobby Spiel in Leipzig, we were able to personally enjoy these trips. A striking design that still exists on modern trams today. The railcars are currently still in use and support regular rail traffic. In the future, the existing Tatra trams will remain in stock as a reserve. However, since there is no end to the use of this tram in sight, you can continue to enjoy this special tram model as a passenger.
Leipzig, the largest city in the Free State of Saxony in East Germany, has a route network of around 146 kilometers.
Tatra tram type T4-B4 Prototype information: The past of the Tatra tram goes back to the GDR era. The previous versions were designed by the Czechoslovakian manufacturer CKD Tatra in what was then the GDR, tested in Prague and then used in the major cities of Dresden, Leipzig, Halle and Magdeburg. After reunification, these trams were even used abroad such as North Korea, Romania and Russia. A total of 2,635 T4 vehicles were built between 1968 and 1987. The majority of production took place in Dresden and Leipzig.
The Leipzig transport company had been using the Tatra tram for a long time. As an exhibitor at the Modell Hobby Spiel in Leipzig, we were able to personally enjoy these trips. A striking design that still exists on modern trams today. The railcars are currently still in use and support regular rail traffic. In the future, the existing Tatra trams will remain in stock as a reserve. However, since there is no end to the use of this tram in sight, you can continue to enjoy this special tram model as a passenger.
365.00 EUR
(RRP*)
199.99 EUR*
Art.-no. Piko_40351
Piko
The model of the legendary BR E16 electric locomotive impresses with its harmonious paintwork and printing, as well as precise housing engravings and exact detailed representations of the distinctive Buchli drives. In addition, the PIKO BR 116 has fine spoked wheel sets, which, together with the delicate roof equipment, the pantographs and the extra grab bars, contribute to an authentic overall impression of the model. The locomotive has excellent running characteristics and high tractive forces for true-to-original train compositions. The model is equipped with a modern Next18 interface and shows the usual red/white light change. The PIKO model corresponds exactly to its original in terms of shape, color and printing. With the factory-integrated sound decoder, which handles the data formats DCC with RailComPlus®, Motorola®, Selectrix® and M4, the BR 116 electric locomotive has once again achieved an outstanding implementation as a sound locomotive. The powerful loudspeaker is tailored to the BR 116 and enables a powerful sound. Many locomotive-typical sounds and functions can be called up individually. Sound is also possible in analogue mode - only driving noise.
310.00 EUR
(RRP*)
199.99 EUR*
Art.-no. Piko_40540
Piko
New for 2022: PIKO captured the E91 perfectly and transferred it to a scale of 1:160. The new development is characterized by the constructive symbiosis of excellent model implementation and excellent driving characteristics. The sharp engravings of the housing, paired with a very fine printing and garnished with extremely filigree pantographs make the locomotive a gem. Of course, the model has a light change in LED technology with red tail lights. Additional lighting functions can be switched on by retrofitting a digital decoder, for which a Next18 interface is available for easy installation.
435.00 EUR
(RRP*)
239.99 EUR*
Art.-no. Piko_40541
Piko
New for 2022: PIKO captured the E91 perfectly and transferred it to a scale of 1:160. The new development is characterized by the constructive symbiosis of excellent model implementation and excellent driving characteristics. The sharp engravings of the housing, paired with a very fine printing and garnished with extremely filigree pantographs make the locomotive a gem. Of course, the model has a light change in LED technology with red tail lights. Additional lighting functions can be controlled using a digital decoder. In the sound version, the BR 191 has a PSD XP 5.1 S SoundDecoder of the latest generation ex works and has PIKO TrainSound® onboard.
320.00 EUR
(RRP*)
179.99 EUR*
Art.-no. Piko_40561
Piko
New for 2022: When implementing the 101 series on a scale of 1:160, PIKO hit the external design of the three-phase locomotive perfectly. Details such as the DSA 350 single-arm pantograph were delicately reproduced. The sharply engraved bogies behind the low aprons round off the visual impression of the locomotive perfectly. A powerful mid-engine provides propulsion in the model. Two brass centrifugal masses on the motor shaft ensure excellent synchronization. The locomotive also has two diagonally arranged wheels with traction tires for good traction. In addition to the headlights using LED technology, the model also has driver's cab lighting. In the sound version, the BR 191 has a PSD XP 5.1 S SoundDecoder of the latest generation ex works and has PIKO TrainSound® onboard.
149.90 EUR
(RRP*)
109.99 EUR*
Art.-no. REE_NW-268
REE Models
LüP per car 95mm
149.90 EUR
(RRP*)
109.99 EUR*
Art.-no. REE_NW-269
REE Models
LüP per car 95mm
79.00 EUR
(RRP*)
49.99 EUR*
Art.-no. REE_NW-313
REE Models
39.90 EUR
(RRP*)
19.99 EUR*
Art.-no. REE_NW-314
REE Models
39.90 EUR
(RRP*)
19.99 EUR*
Art.-no. REE_NW-315
REE Models
79.00 EUR
(RRP*)
39.99 EUR*
Art.-no. REE_NW-320
REE Models
79.00 EUR
(RRP*)
49.99 EUR*
Art.-no. REE_NW-321
REE Models
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-1
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-2
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-3
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
– Exclusively for Lemke Collection
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
– Exclusively for Lemke Collection
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-4
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-5
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
149.90 EUR
(RRP*)
119.99 EUR*
Art.-no. Jaegerndorfer_JC60000-6
Jägerndorfer
The ÖBB series 2043 is a four-axle diesel-hydraulic locomotive that was purchased in large numbers from the 1960s onwards and contributed significantly to the displacement of steam locomotives from the non-electrified ÖBB routes. It was used primarily on branch lines and pulled both freight and passenger trains.
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
Model features:
– detailed design taking into account all design differences
– Light change white/red
– Interface NEM 662 (Next 18)
– extensive and detailed printing
119.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Jaegerndorfer_JC60270
Jägerndorfer
2 parts Set of domestic passenger carriages
Sparlack - painting
Length over buffer: 335 mm
Minimum passable radius: 225 mm
Sparlack - painting
Length over buffer: 335 mm
Minimum passable radius: 225 mm
119.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Jaegerndorfer_JC60280
Jägerndorfer
2 parts Set of domestic passenger carriages
City Shuttle design with ÖBB word mark
Length over buffer: 280 mm
Minimum passable radius: 225 mm
City Shuttle design with ÖBB word mark
Length over buffer: 280 mm
Minimum passable radius: 225 mm
119.90 EUR
(RRP*)
69.99 EUR*
Art.-no. Jaegerndorfer_JC60290
Jägerndorfer
2 parts Set of domestic passenger carriages
City Shuttle design with ÖBB Pflatsch
Length over buffer: 290 mm
Minimum passable radius: 225 mm
City Shuttle design with ÖBB Pflatsch
Length over buffer: 290 mm
Minimum passable radius: 225 mm
207.90 EUR
(RRP*)
149.99 EUR*
Art.-no. Jaegerndorfer_JC60380
Jägerndorfer
3-piece push-pull train set without motor
City Shuttle design with ÖBB wordmark
6-pin decoder interface
length over buffers: 495 mm
minimum drivable radius: 225 mm
City Shuttle design with ÖBB wordmark
6-pin decoder interface
length over buffers: 495 mm
minimum drivable radius: 225 mm
207.90 EUR
(RRP*)
149.99 EUR*
Art.-no. Jaegerndorfer_JC60390
Jägerndorfer
3-piece push-pull train set without motor
City Shuttle Design with ÖBB Pflatsch
6-pin decoder interface
length over buffers: 495 mm
minimum drivable radius: 225 mm
City Shuttle Design with ÖBB Pflatsch
6-pin decoder interface
length over buffers: 495 mm
minimum drivable radius: 225 mm
449.90 EUR
(RRP*)
249.99 EUR*
Art.-no. Jaegerndorfer_JC75410
Jägerndorfer
- 4-window front with low roof
- Train with 1 power car, 2 intermediate cars and 1 control car
- Model with changing lights
- Control car with 6-pin interface, railcar with Next 18 interface
The 5045 and 5145 series of the Austrian Federal Railways are express train diesel multiple units built in the 1950s and known as the Blauer Blitz. The vehicles were initially used primarily in international and national express train traffic; the express railcar train (TS) "Miramare" was in use between Vienna and Trieste. For many years they also ran domestic express connections between Vienna and Villach and between Vienna and Graz via the Southern Railway. Several vehicles have been preserved as museum pieces. They are owned by AUSTROVAPOR, are looked after by the “Club Blauer Blitz” in the Strasshof Railway Museum and could be chartered in any combination for special trips until 2009. Since 2016, a two-part railcar train has been available again for nostalgic trips after partial repairs.
592.90 EUR
(RRP*)
349.99 EUR*
Art.-no. Jaegerndorfer_JC75412
Jägerndorfer
- 4-window front with low roof
- Train with 1 power car, 2 intermediate cars and 1 control car
- Model with changing lights
- DCC digital model with sound
The 5045 and 5145 series of the Austrian Federal Railways are express train diesel multiple units built in the 1950s and known as the Blauer Blitz. The vehicles were initially used primarily in international and national express train traffic; the express railcar train (TS) "Miramare" was in use between Vienna and Trieste. For many years they also ran domestic express connections between Vienna and Villach and between Vienna and Graz via the Southern Railway. Several vehicles have been preserved as museum pieces. They are owned by AUSTROVAPOR, are looked after by the “Club Blauer Blitz” in the Strasshof Railway Museum and could be chartered in any combination for special trips until 2009. Since 2016, a two-part railcar train has been available again for nostalgic trips after partial repairs.
57.90 EUR
(RRP*)
52.11 EUR*
Art.-no. Fleischmann_6660038
Fleischmann
Pocket wagon, type Sdgnss/T5, of the Hupac.
New construction in 2024!
- Die-cast metal chassis
- Loaded with a trailer from the Schöni forwarding company
New construction in 2024!
- Die-cast metal chassis
- Loaded with a trailer from the Schöni forwarding company
3.99 EUR*
Art.-no. Kestrel_GMKD89
Kestrel
PROTOTYPE
Pay and display machines have replaced the original parking machines and can now be found in all paid parking areas across the country. Their use has increased as they serve a larger area and multiple plazas, making installation, maintenance and replacement faster and easier than their predecessors. They can be found in street parking lots and parking garages, but also in older parking garages and shopping malls.
MODEL
This pack contains two photopolymer resin pay stations. They are already painted and can be used directly from the pack on the layout.
Pay and display machines have replaced the original parking machines and can now be found in all paid parking areas across the country. Their use has increased as they serve a larger area and multiple plazas, making installation, maintenance and replacement faster and easier than their predecessors. They can be found in street parking lots and parking garages, but also in older parking garages and shopping malls.
MODEL
This pack contains two photopolymer resin pay stations. They are already painted and can be used directly from the pack on the layout.
3.99 EUR*
Art.-no. Kestrel_GMKD90
Kestrel
PROTOTYPE
The first vending machine dates back to ancient Rome and dispensed holy water. Many years later, the sight of a vending machine can be a welcome relief to a weary traveler.
These machines can be found all over the world, from train stations in the UK to promenades in Hong Kong and even in hospitals.
MODEL
This pack contains two photopolymer resin vending machines. They are pre-painted and ready to use on the layout right out of the box.
The first vending machine dates back to ancient Rome and dispensed holy water. Many years later, the sight of a vending machine can be a welcome relief to a weary traveler.
These machines can be found all over the world, from train stations in the UK to promenades in Hong Kong and even in hospitals.
MODEL
This pack contains two photopolymer resin vending machines. They are pre-painted and ready to use on the layout right out of the box.
3.99 EUR*
Art.-no. Kestrel_GMKD91
Kestrel
PROTOTYPE
Every station is required to sell tickets and as part of British Rail's modernization plans this became easier with the introduction of 'QuickFare' ticket machines in 1989. These machines were designed in such a way that passengers could issue their tickets themselves without the need for an employee to be present. They were especially useful at quiet or unoccupied train stations. In the meantime, these machines have been gradually replaced by more modern devices.
MODEL
This pack contains two photopolymer resin ticket machines. They are already painted and can be used directly from the pack on the layout.
Every station is required to sell tickets and as part of British Rail's modernization plans this became easier with the introduction of 'QuickFare' ticket machines in 1989. These machines were designed in such a way that passengers could issue their tickets themselves without the need for an employee to be present. They were especially useful at quiet or unoccupied train stations. In the meantime, these machines have been gradually replaced by more modern devices.
MODEL
This pack contains two photopolymer resin ticket machines. They are already painted and can be used directly from the pack on the layout.
9.99 EUR*
(28g, base price 356.79 EUR/kg)
Art.-no. Microscale_MI-9
Microscale
Micro Kristal Klear is the insider tip in model making - no other product achieves such a big difference in the appearance of your models.
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
Micro Kristal Klear is a liquid, pack size 28 grams, that you can use to create very realistic looking small windows up to about 6mm in size and it can also be used to attach clear plastic parts. The advantages of Micro Kristal Klear is that clear parts can be attached to painted parts without a visible splice and the color shows through at the joints giving a very realistic look.
- quick and easy to apply and becomes absolutely clear
- Water soluble before drying and waterproof afterwards
- during drying it loses its milky white color and becomes clear
In addition, Micro Kristal Klear is the solution for a super strong and flexible bond for wood, plastic, paper or most other combinations.
Tip for making small windows: To make small windows, dip a toothpick into the thick liquid and draw a line all over the edges. Then hold the toothpick as flat as possible to the opening, then pull it across the opening from one side to the other side. Thus you form a bubble which forms a very thin, true to scale, rigid and flexible window. The drying takes about 15 minutes and becomes noticeably clearer. The model should stand still while it is drying so that the sensitive membrane does not tear.
In our blog you will find an interesting video about how Micro Kristal Klear works !
13.99 EUR
(RRP*)
9.99 EUR*
Art.-no. Noch_36022
Noch
5 figures + 2 ladders
18.99 EUR
(RRP*)
9.99 EUR*
Art.-no. Noch_36965
Noch
11 players + 1 ball
Football is the most popular sport. Everyone gets excited about big events like the World Cup or the European Championship - whether men or women.For all fans, there is now a football team in N gauge, i.e. a scale of 1:160, for the model railway. All 11 figures are hand-painted. The football kit consists of a white jersey, black sports pants and black socks. The shoes with studs are red. The goalkeeper, on the other hand, wears a blue jersey. This makes him ideally distinguishable from the field players. He also wears black goalkeeper gloves.Each player has a number printed on the jersey. Of course, a football is also a must.
Football is the most popular sport. Everyone gets excited about big events like the World Cup or the European Championship - whether men or women.For all fans, there is now a football team in N gauge, i.e. a scale of 1:160, for the model railway. All 11 figures are hand-painted. The football kit consists of a white jersey, black sports pants and black socks. The shoes with studs are red. The goalkeeper, on the other hand, wears a blue jersey. This makes him ideally distinguishable from the field players. He also wears black goalkeeper gloves.Each player has a number printed on the jersey. Of course, a football is also a must.
[nbsp]
Yours sincerely
Daniel Mrugalski
DM-Toys
[nbsp]