Shipping Destination
Largest N gauge range
All products available
Fast shipping
Shipping Destination
Language:
Our product palette at 1 view
Announced products
New products that we will soon be listing in our range. Enjoy the benefits of notification without incurring any obligations.
Info flyer
Regularly published flyers, available as PDF:
Workshop service
We repair your existing rolling stock with our workshop service! And it doesn’t matter whether you bought it from us or not.
Buy digitized
You can also order almost all locomotives and train sets in our delivery program in DCC or Selectrix Digital. Since both locomotives and decoders are always sufficiently in stock, the conversion time is usually less than 2 working days.
Digitization service
As a tailor-made service, we offer you the digitalization of your existing locomotives by professionals. No matter where you bought them.
N-Scale 11/2024: Langley, Fleischmann, Micromotor, Rietze
Dear customer,
A large number of new products reached us this week from the model railway industry.
44.99 EUR*
Art.-no. Faller_272002
Faller
The snow is falling gently and is once again covering our winter range in its wintry splendor! In this time of contemplation and joy, our popular FALLER Advent calendar is a must. It contains a wonderful collection of 24 new hand-painted FALLER N miniature figures and a festive surprise at the end. This is a great opportunity for all fans of hand-painted miniature figures and a magical gift for the Christmas season.
12.64 EUR*
Art.-no. Preiser_79226
Preiser
2x Santa Claus, children, snowman
29.99 EUR*
Art.-no. MicromotorEU_NA050C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Arnold Rh 5047 ÖBB, Gysev, STLB, NEG T4.
Replaces Arnold engines HN2169/12, HN2278/07
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0812S
- 1x Motor mount S026 Startrain v1
- 1x cardan coupling SP003
- 1x flywheel F019
Replacement engine / conversion kit suitable for the following locomotives:
- Arnold No. HN2169, HN2188-HN2191, HN2207-HN2208, HN2278-HN2280, HN2521-HN2522
Replaces Arnold engines HN2169/12, HN2278/07
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0812S
- 1x Motor mount S026 Startrain v1
- 1x cardan coupling SP003
- 1x flywheel F019
Replacement engine / conversion kit suitable for the following locomotives:
- Arnold No. HN2169, HN2188-HN2191, HN2207-HN2208, HN2278-HN2280, HN2521-HN2522
29.99 EUR*
Art.-no. MicromotorEU_NB005C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Brawa BR 144, BR 145, BR 244, E 44.
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Replaces engine 0019041.00
Scope of delivery:
- 1x Motor 0816D
- 2x motor holder S023 Liliput Flirt MU v1
- 2x shaft adapter A1 10->15 12 mm
- 2x snail W0.3-3.5-5
- 2x flywheel F015
- 2x stranded wire
Replacement motor / conversion kit suitable for the following items:
Brawa No. 63100-63117
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Replaces engine 0019041.00
Scope of delivery:
- 1x Motor 0816D
- 2x motor holder S023 Liliput Flirt MU v1
- 2x shaft adapter A1 10->15 12 mm
- 2x snail W0.3-3.5-5
- 2x flywheel F015
- 2x stranded wire
Replacement motor / conversion kit suitable for the following items:
Brawa No. 63100-63117
29.99 EUR*
Art.-no. MicromotorEU_NB006
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Brawa BR 142, BR 211, BR 242, E 42, SOB/Lookup Ae 477.
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Replaces motors 1201.01.02, 1202.01.02
Scope of delivery:
- 1x Motor 0816D
- 1x engine mount S026 Startrain MU v1
- 2x shaft adapter A4 10->15 12.5 mm
- 2x stranded wire
Replacement motor / conversion kit suitable for the following items:
Brawa No. 1200-1205, 63010-63012
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Replaces motors 1201.01.02, 1202.01.02
Scope of delivery:
- 1x Motor 0816D
- 1x engine mount S026 Startrain MU v1
- 2x shaft adapter A4 10->15 12.5 mm
- 2x stranded wire
Replacement motor / conversion kit suitable for the following items:
Brawa No. 1200-1205, 63010-63012
29.99 EUR*
Art.-no. MicromotorEU_NH013C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with model Hobbytrain / Kato SBB Re 4/4 460, BLS Re 4/4 465.
Replacement engines 13709M, K137000-7
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 1015D
- 1x (2 parts) engine mount S042 Roco 116296
- 2x shaft adapter A18 10->15 31 mm
- 2x snail W0.4-5-6
- 1x flywheel F005
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Hobbytrain H25106, Kato 13709-XX, 13710-XX, 13711-XX, 137111-137124, 13712-XX, 13714-XX
Replacement engines 13709M, K137000-7
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 1015D
- 1x (2 parts) engine mount S042 Roco 116296
- 2x shaft adapter A18 10->15 31 mm
- 2x snail W0.4-5-6
- 1x flywheel F005
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Hobbytrain H25106, Kato 13709-XX, 13710-XX, 13711-XX, 137111-137124, 13712-XX, 13714-XX
29.99 EUR*
Art.-no. MicromotorEU_NM069C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Minitrix BR 280, V 80.
Replaces engines E324 872, E325 986
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S038 Mabuchi 010 motor
- 2x snail W0.3-3.5-5
- 1x flywheel F015
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A21 10->15 14 mm
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Minitrix No. 11611, 12280, 12504, 12553
Replaces engines E324 872, E325 986
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S038 Mabuchi 010 motor
- 2x snail W0.3-3.5-5
- 1x flywheel F015
- 1x shaft adapter A1 10->15 12 mm
- 1x shaft adapter A21 10->15 14 mm
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Minitrix No. 11611, 12280, 12504, 12553
Conversion kit for bell-armature motor for Minitrix BR 220, CSD BR 781, V 200 DR / WAB, Taigatrommel
29.99 EUR*
Art.-no. MicromotorEU_NM070C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Minitrix BR 220, CSD BR 781, V 200 DR / WAB, Taigatrommel.
Replaces motors 31 2877 05, 41 2877 05
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S038 Mabuchi 010 motor
- 2x snail W0.4-4-7
- 2x flywheel F007
- 2x flywheel F016
- 2x shaft adapter A25 10->15 18 mm
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Minitrix No. 12166, 12358, 12515, 12566, 12626, 12877-12878
Replaces motors 31 2877 05, 41 2877 05
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S038 Mabuchi 010 motor
- 2x snail W0.4-4-7
- 2x flywheel F007
- 2x flywheel F016
- 2x shaft adapter A25 10->15 18 mm
- 2x stranded wire
Replacement engine / conversion kit suitable for the following locomotives:
- Minitrix No. 12166, 12358, 12515, 12566, 12626, 12877-12878
29.99 EUR*
Art.-no. MicromotorEU_NME001G
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Mehano G 2000 (MRCE, Rail4chem, Railion, Serfer, WLE), SBB Am 840.
Replaces engine 54157
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D*
- 1x Motor mount S026 Startrain v1
- 2x cardan coupling SP013
- 2x stranded wire
Replacement motor / conversion kit suitable for the following locomotives:
- Mehano No. 55536, 55538, 55542, 55544, 55546, 55550, 55878
Replaces engine 54157
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D*
- 1x Motor mount S026 Startrain v1
- 2x cardan coupling SP013
- 2x stranded wire
Replacement motor / conversion kit suitable for the following locomotives:
- Mehano No. 55536, 55538, 55542, 55544, 55546, 55550, 55878
59.99 EUR*
Art.-no. MicromotorEU_NP003C
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Piko BR 440, BR 442, BR 646, GTW 2/6, GTW 2/8, RABe 526, Talent.
Replaces motors 40200-57, 40220-94, 40270-34
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 2x Motor 0812S
- 1x (4 parts) motor holder S023 Liliput Flirt MU v1
- 2x flywheel F019
- 2x cardan coupling SP013
- 1x shrink tube 9 mm
Replacement motor / conversion kit suitable for the following locomotives:
- Piko No. 40200-40209, 40220-40237, 40270-40275, 94000
Replaces motors 40200-57, 40220-94, 40270-34
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 2x Motor 0812S
- 1x (4 parts) motor holder S023 Liliput Flirt MU v1
- 2x flywheel F019
- 2x cardan coupling SP013
- 1x shrink tube 9 mm
Replacement motor / conversion kit suitable for the following locomotives:
- Piko No. 40200-40209, 40220-40237, 40270-40275, 94000
29.99 EUR*
Art.-no. MicromotorEU_NP004G
Micromotor.EU
Conversion kit with high-quality bell-armature motor, compatible with Piko VT 4.12.
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S002 Piko motor MU v1
- 2x shaft adapter A10 10->15 7 mm
- 1x hose coupling 1 mm
- 2x stranded wire
Replacement motor / conversion kit suitable for the following locomotives:
- Piko No. 5/0649-01, 5/4105, 5/5430/7
The locomotive is not included in delivery. You can find installation instructions under Downloads.
Scope of delivery:
- 1x Motor 0816D
- 1x motor holder S002 Piko motor MU v1
- 2x shaft adapter A10 10->15 7 mm
- 1x hose coupling 1 mm
- 2x stranded wire
Replacement motor / conversion kit suitable for the following locomotives:
- Piko No. 5/0649-01, 5/4105, 5/5430/7
89.95 EUR
(RRP*)
83.65 EUR*
Art.-no. Liliput_L260114
Liliput
Operating numbers 972 3 009-4 and 972 3 105-0
Length over buffers per car 75 mm
Length over buffers per car 75 mm
89.95 EUR
(RRP*)
83.65 EUR*
Art.-no. Liliput_L260116
Liliput
2 pcs. Set, 4-axle. Tank car, NS, Ep.III
44.99 EUR*
Art.-no. Minitrix_15659
Minitrix
Prototype: DB Schenker Rail sulfuric acid tank car, used by PKP Cargo (PKPC). Current model: reissue with a new road number (33 51 798 4 119-2). Detailed chassis with openwork frame. Outer longitudinal beam as U-profile with rope eyes. Bogies of Minden-Dorstfeld design. Attached work platform. Attached brakeman's platform. Length over buffers 80 mm.
20.69 EUR*
Art.-no. Minitrix_18099
Minitrix
Prototype: Deutsche Bahn (DB AG) type Gs 213. European standard type with a length of 10.58 m with panel walls and ventilation openings.
Model: With kinematics for close coupling. Length over buffers 67 mm.
Model: With kinematics for close coupling. Length over buffers 67 mm.
149.00 EUR
(RRP*)
134.10 EUR*
Art.-no. Minitrix_18267
Minitrix
Prototype: Three 4-axle chemical tank cars from the TRANSFESA company, used by the Spanish State Railways (RENFE). Operating condition around 2000.
Model: Detailed chassis with openwork frame. Y25 type bogies. Attached work platform. Attached brakeman's platform. Total length over buffers 240 mm.
Model: Detailed chassis with openwork frame. Y25 type bogies. Attached work platform. Attached brakeman's platform. Total length over buffers 240 mm.
53.09 EUR*
Art.-no. Minitrix_18448
Minitrix
Prototype: Large-capacity sliding wall wagon, type Habbinss, of the Hungarian State Railways (MAV) from 2005.
Model: With kinematics for close coupling. Length over buffers 145 mm.
Model: With kinematics for close coupling. Length over buffers 145 mm.
314.90 EUR
(RRP*)
283.41 EUR*
Art.-no. Fleischmann_714500
Fleischmann
Operating No. 001 150-2
Steam locomotive 001 150 of the Deutsche Bundesbahn.
- Open front apron
- Witte wind deflectors
- Use in high-quality express train traffic
- Tender 2'2' T 34
- Clear view between the boiler and the chassis
- Driver's cab and engine lighting installed; switchable in digital mode
The locomotive 01 150 was delivered in 1935 with the factory number 22698 by the Henschel & Sohn locomotive smithy in Kassel. It initially earned its money in hard work on the low mountain routes in Hesse and Thuringia - from Bebra. It remained true to its Hessian homeland for thirty years. Darmstadt, Hanau, Frankfurt/M, Wiesbaden and Giessen were its stations and the main lines on the Rhine and Lahn, over the Spessart heights and the Wetterau were its territory. It was decommissioned in November 1973 in Hof.
Steam locomotive 001 150 of the Deutsche Bundesbahn.
- Open front apron
- Witte wind deflectors
- Use in high-quality express train traffic
- Tender 2'2' T 34
- Clear view between the boiler and the chassis
- Driver's cab and engine lighting installed; switchable in digital mode
The locomotive 01 150 was delivered in 1935 with the factory number 22698 by the Henschel & Sohn locomotive smithy in Kassel. It initially earned its money in hard work on the low mountain routes in Hesse and Thuringia - from Bebra. It remained true to its Hessian homeland for thirty years. Darmstadt, Hanau, Frankfurt/M, Wiesbaden and Giessen were its stations and the main lines on the Rhine and Lahn, over the Spessart heights and the Wetterau were its territory. It was decommissioned in November 1973 in Hof.
314.90 EUR
(RRP*)
283.41 EUR*
Art.-no. Fleischmann_714501
Fleischmann
Company No. 01 2226-7
Steam locomotive 01 2226 of the Deutsche Reichsbahn.
- Wagner wind deflectors
- Clear view between the boiler and the chassis
- Use in high-quality express train traffic
- Tender 2'2' T 34
- Driver's cab and engine lighting installed; switchable in digital mode
The two-cylinder engines of the 01 series are considered to be the first express train locomotives built according to the standard construction program. The first batches were equipped with leading wheels of 800 mm diameter and approved for 120 km/h. From 01 102, leading wheels of 1,000 mm and reinforced brakes were used, which increased the maximum permitted speed to 130 km/h. The DR retained the original design with the large Wagner smoke deflectors and the air and feed pumps in the smoke chamber niches after the Second World War.
After the war, the locomotive 01 226 remained with the Railway Company of the German Democratic Republic (Deutsche Reichsbahn). After switching to the computerized numbering plan, the machine was renumbered 01 2226-7 and remained in service until 1973.
Steam locomotive 01 2226 of the Deutsche Reichsbahn.
- Wagner wind deflectors
- Clear view between the boiler and the chassis
- Use in high-quality express train traffic
- Tender 2'2' T 34
- Driver's cab and engine lighting installed; switchable in digital mode
The two-cylinder engines of the 01 series are considered to be the first express train locomotives built according to the standard construction program. The first batches were equipped with leading wheels of 800 mm diameter and approved for 120 km/h. From 01 102, leading wheels of 1,000 mm and reinforced brakes were used, which increased the maximum permitted speed to 130 km/h. The DR retained the original design with the large Wagner smoke deflectors and the air and feed pumps in the smoke chamber niches after the Second World War.
After the war, the locomotive 01 226 remained with the Railway Company of the German Democratic Republic (Deutsche Reichsbahn). After switching to the computerized numbering plan, the machine was renumbered 01 2226-7 and remained in service until 1973.
219.90 EUR
(RRP*)
197.91 EUR*
Art.-no. Fleischmann_732406
Fleischmann
Electric locomotive Re 420 169 of the Swiss Federal Railways.
New construction in 2024!
- Fine windshield wipers as etched part
- Version without air conditioning
- Filigree design of the pantographs
- Closed rail cleaners included
- Z21 driver's cab available
The Re 4/4 II are universal locomotives and are therefore used for passenger and freight trains. Heavy trains are usually hauled in double traction with a Re 6/6. With 277 units delivered, the Re 4/4 II locomotives represent the SBB's largest series of locomotives and were purchased between 1964 and 1985. With an output of 4,700 kW, the unit reaches a top speed of 140 km/h.
New construction in 2024!
- Fine windshield wipers as etched part
- Version without air conditioning
- Filigree design of the pantographs
- Closed rail cleaners included
- Z21 driver's cab available
The Re 4/4 II are universal locomotives and are therefore used for passenger and freight trains. Heavy trains are usually hauled in double traction with a Re 6/6. With 277 units delivered, the Re 4/4 II locomotives represent the SBB's largest series of locomotives and were purchased between 1964 and 1985. With an output of 4,700 kW, the unit reaches a top speed of 140 km/h.
5.99 EUR*
Art.-no. Langley_A131
Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
5.99 EUR*
Art.-no. Langley_A132
Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A133
Langley Models
6 different golfers in different positions and 2 pulled golf trolleys
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A134
Langley Models
7 different Lawn Bowls figures and Lawn Bowls.
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
12.99 EUR*
Art.-no. Langley_A135
Langley Models
Loading crane at the port
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A136
Langley Models
Figures Men 10-piece
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A137
Langley Models
Figures Women 10-piece
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
6.99 EUR*
Art.-no. Langley_A138
Langley Models
Postman and bicycle, postman and mailbox open
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A139
Langley Models
Marching soldiers 10 pieces
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
6.99 EUR*
Art.-no. Langley_A140
Langley Models
Marching soldiers color group 5-piece
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
6.99 EUR*
Art.-no. Langley_A141
Langley Models
Wishing well
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
5.99 EUR*
Art.-no. Langley_A142
Langley Models
Petrol canister/water canister 8-piece
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
9.99 EUR*
Art.-no. Langley_A143
Langley Models
Machine workshop. Lathes & pillar drills
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
9.99 EUR*
Art.-no. Langley_A144
Langley Models
3 x standing 2 x wall machines
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A145
Langley Models
Lollipop figures, traffic police & traffic guards 8 pieces
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
6.99 EUR*
Art.-no. Langley_A146
Langley Models
Picnic figures & blanket
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_A147
Langley Models
oh, tasteless, these naughty people.
2 x inflamed couples!!, man with a lovesick dog, 2 x prostitutes, man with his pants down, his butt hanging out.
Unpainted metal kit made of resin and white metal from Langley Models
2 x inflamed couples!!, man with a lovesick dog, 2 x prostitutes, man with his pants down, his butt hanging out.
Unpainted metal kit made of resin and white metal from Langley Models
6.99 EUR*
Art.-no. Langley_A148
Langley Models
4 Painter & Window Cleaner Figures & Ladder
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
9.99 EUR*
Art.-no. Langley_E63
Langley Models
Clarke Stalwart Forklifts
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
11.99 EUR*
Art.-no. Langley_E64
Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
15.99 EUR*
Art.-no. Langley_E65
Langley Models
Iveco truck with tipping body (can be mounted in any position)
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
11.99 EUR*
Art.-no. Langley_E66
Langley Models
Car transporter 17ft trailer
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
11.99 EUR*
Art.-no. Langley_E67
Langley Models
16ft Farm/Dropside Trailer
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
7.99 EUR*
Art.-no. Langley_NCIR2
Langley Models
Clown driving in clown car, 2 comedy policemen, 3 other clowns
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
5.99 EUR*
Art.-no. Langley_NCIR3
Langley Models
Knife thrower and assistant at the target board, with ringmaster/announcer
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
11.99 EUR*
Art.-no. Langley_NCIR4
Langley Models
2 x Sitting Elephants & Assistants/Dancers, Baby Elephant in Training & Trainer
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
9.99 EUR*
Art.-no. Langley_NCIR5
Langley Models
3 x Cossack riders and horses (two riders hanging sideways and one riding standing).
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
9.99 EUR*
Art.-no. Langley_NCIR6
Langley Models
3 x Libery circus horses with feathers, trainer and whip.
Unpainted metal kit made of resin and white metal from Langley Models
Unpainted metal kit made of resin and white metal from Langley Models
16.99 EUR*
(0.39m, base price 43.56 EUR/m)
Art.-no. Noch_33170
Noch
12 parts, total length 39 cm, wall height 0.9 cm, pillar height 1.2 cm
Stone by Stone
Hand-painted plastic walls
The small walls are very well suited to fencing in properties and courtyards or to demarcate fields. The individual wall sections and pillars allow many individual installation situations to be mastered.
The walls can be cut with a jigsaw and glued together with superglue or hot glue. They are realistically hand-painted.
The quarry stone wall, made of natural stone, is a popular means of creating boundaries in a natural garden. The random mixture of natural stone and mortar creates the unique texture of the quarry stone wall.
Note: The set contains twelve parts: four wall elements with one pillar each, three wall elements without pillars, and five individual arrows
Stone by Stone
Hand-painted plastic walls
The small walls are very well suited to fencing in properties and courtyards or to demarcate fields. The individual wall sections and pillars allow many individual installation situations to be mastered.
The walls can be cut with a jigsaw and glued together with superglue or hot glue. They are realistically hand-painted.
The quarry stone wall, made of natural stone, is a popular means of creating boundaries in a natural garden. The random mixture of natural stone and mortar creates the unique texture of the quarry stone wall.
Note: The set contains twelve parts: four wall elements with one pillar each, three wall elements without pillars, and five individual arrows
16.99 EUR*
(0.39m, base price 43.56 EUR/m)
Art.-no. Noch_33171
Noch
12 parts, total length 39 cm, wall height 0.8 cm, pillar height 1.2 cm
Stone by Stone
Hand-painted plastic walls
The small walls are very well suited to fencing in properties and courtyards or to demarcating fields. The individual wall sections and pillars allow many individual installation situations to be mastered.
The walls can be cut with a jigsaw and glued together with superglue or hot glue. They are realistically hand-painted.
The fieldstone wall is characterized above all by the different sized stones and the resulting irregular layering of the stones. A fieldstone wall consists of hand-collected and sorted fieldstones that are put together with mortar.
Note: The set contains twelve pieces: four wall elements with one pillar each, three wall elements without pillars, and five individual pillars.
Stone by Stone
Hand-painted plastic walls
The small walls are very well suited to fencing in properties and courtyards or to demarcating fields. The individual wall sections and pillars allow many individual installation situations to be mastered.
The walls can be cut with a jigsaw and glued together with superglue or hot glue. They are realistically hand-painted.
The fieldstone wall is characterized above all by the different sized stones and the resulting irregular layering of the stones. A fieldstone wall consists of hand-collected and sorted fieldstones that are put together with mortar.
Note: The set contains twelve pieces: four wall elements with one pillar each, three wall elements without pillars, and five individual pillars.
13.99 EUR*
Art.-no. Noch_36559
Noch
A situation that almost everyone has experienced with the joys
Many people know this situation when you are out with friends, having fun and drinking a glass or two of alcohol on the side. Often you don't even notice how much has already been consumed and you're stumbling through the streets drunk. A scene that occurs in real life and should therefore not be missing on any diorama. Recreate realistic scenes with the NOCH miniature figures N "Drunk" - whether in the city, in the country or at the lake, where young people are out and about with their friends and partying late into the night.
Many people know this situation when you are out with friends, having fun and drinking a glass or two of alcohol on the side. Often you don't even notice how much has already been consumed and you're stumbling through the streets drunk. A scene that occurs in real life and should therefore not be missing on any diorama. Recreate realistic scenes with the NOCH miniature figures N "Drunk" - whether in the city, in the country or at the lake, where young people are out and about with their friends and partying late into the night.
6.90 EUR*
Art.-no. Rietze_16402
Rietze
New shape in 3D printing
Yours sincerely
Daniel Mrugalski
DM-Toys